High Resolution Scanned Heroscape Cards -- Scans Needed

[Fi Skirata]

Originally Posted by Jim

Well I tried uploading it to the gallery twice, but it never showed up. In the meantime, I have placed it in my public DropBox folder. So with that, here's my test for Master Win Chiu Woo.

Let me know if there is anything different I should do...

Looks good so far, I will print it out latter and check the size.

[Fi Skirata]

Master Win Chiu Woo passed the test and will be added as the first card! The resolution was just awesome, and the size was dead on. Whatever you did Jim, just keep on doing it!

[bradtato]

Sizing is absolutely perfect, however, when I printed it, I tried to get front and back like the original cards, and the first side (advanced) came out looking pretty centered (guess I should have measured), so I stuck it back in the printer, this time upside down, and printed the basic side, and it came out about an inch off. Any ideas on how to remedy this, other than not using the basic side of the card?

[Fi Skirata]

Originally Posted by bradtato

Sizing is absolutely perfect, however, when I printed it, I tried to get front and back like the original cards, and the first side (advanced) came out looking pretty centered (guess I should have measured), so I stuck it back in the printer, this time upside down, and printed the basic side, and it came out about an inch off. Any ideas on how to remedy this, other than not using the basic side of the card?

Was it an inch off in size or alignment? If it was alignment, then it might just be how you put it in the printer (the second time).

[wilabill1]

I just wanted to let you guys know that most of the exclusives have pdfs for them already.

Agent Skahen

Samuel Brown

[Fi Skirata]

Originally Posted by wilabill1

I just wanted to let you guys know that most of the exclusives have pdfs for them already.

Agent Skahen

Samuel Brown

Thanks for these links, do you know if they are already correctly sized? We still need ones for Nerak, Elite Onyx Vipers, Sir Hawthorne, Quasatch Raiders and Granite Guardians (to finish the repaints). I would then like to have a PDF for every figure released (preferably working from wave 1 down) so people can still get the card if they don't have it/lost it.

[bradtato]

Originally Posted by Fi Skirata

Was it an inch off in size or alignment? If it was alignment, then it might just be how you put it in the printer (the second time).

The alignment of the back in comparison to the front was off by just under an inch. I haven't had the opportunity to retry since my first attempt yet, but I'll certainly be trying again this weekend.

[phil413ican]

I have some cards scanned that I could save in PDF and then upload. I will have to look and see what I have.

[Fi Skirata]

Added Sam!

[Bonesaw]

Any chance of getting a Dumutef Guard scan?

[SuperSamyon]

Guys, keep in mind that all printers have their own offset so it will probably be impossible to create one master PDF set that works for everyone's equipment. You will have to mess with the file a bit to get it perfect.

[Fi Skirata]

Added Skahen and Mimring!