|
3D Printing A Forum to discuss 3D Printing |
|
Thread Tools | Search this Thread | Display Modes |
#73
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
Quote:
|
#74
|
|||
|
|||
Re: Index of Classic Heroscape .stl files
Quote:
|
#75
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
@White Knight , My bro cleaned up the Zelrig model and finished it up. He said that he re sculpted the wings a bit but said it is looking pretty good. I'll have to get him to try and log in to his old scapers login and post it in here. Unfortunately Ive been swamped so I haven't been able to finish the couple of little tweaks on that zombie hulk to finish him up.
@shaolin , Sometimes I'll print my models at a 45 degree angle or on there back if they have little bits sticking up such as the claws on the wolverine. That way those parts print support free. Check out my ebay where you can find my custom dice trays and dicetowers: https://www.ebay.com/usr/captainamazing_jerdo |
#76
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
Quote:
You can back in the oven at about 160F for about 6 hours to dry it out. That should prevent it from snapping and also make better prints. Since ankles are small, a lot of times I'll come back and use my solder tip to fuse (smear) the layers a little better. Basically, I run the tips up and down the leg/ankle just a little to smooth out the legs and increase their strength. You can also go a little higher on the nozzle temperature to try to improve the adhesion even more. |
#77
|
|||
|
|||
Re: Index of Classic Heroscape .stl files
@TREX
thanks for the tip, I didn’t realize you could rotate for the print, just assumed it was vertical. I’ll keep that in mind.
@White Knight I had my heat up a little more than usual, but it was stringing so I had it retracting. I think the retraction was too much and the back and forth cut the filament. So I put the heat back to 200 and turned retraction off. It finished, but here’s the result. I saw a setting where the printer stops extruding before it travels and uses the oozing overextrusion that would normally be the string. I want to try turning that on, turn the temp back up to 205 or 210, and see if that helps with the stringing. Retraction broke the filament and turning down the extrusion left tiny gaps, so that setting is my next attempt. We’ll see. Thanks for the tips! |
#78
|
|||
|
|||
Re: Index of Classic Heroscape .stl files
One more question. For characters without a base, does anyone know the dimensions of the HS bases? 35mm x 3mm or so?
|
#79
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
Quote:
Height .15" (3.8mm) |
#80
|
|||
|
|||
Re: Index of Classic Heroscape .stl files
Perfect! Thank you sir
|
#81
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
Thank you in advance for the granite guardians White Knight! Does anyone have a heroscape double base model? I've simply been printing the marro cavalry dude and stopping the print when the base is done. I need the double bases for customs.
Mercy is something the weak beg for and the strong lack. |
#82
|
|||
|
|||
Re: Index of Classic Heroscape .stl files
Sorry, I have another question. What do you guys put for height? The snap scale is nice where I just set the z axis and it scales the rest in proportion. I’ve been doing 28mm for medium characters. What would you do for a large? And bigger sizes. Increase by 5mm for each size increase or something like that?
|
#83
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
Quote:
For the other comment about bases. They are in this thread or in one of the other 3d printing threads on here. White knight uses the solid ones for model files but there are some cooler more hollow ones that print upside down well also. Check out my ebay where you can find my custom dice trays and dicetowers: https://www.ebay.com/usr/captainamazing_jerdo |
#84
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
Quote:
Granite Guardian 2 Granite Guardian 3 |
|
Thread Tools | Search this Thread |
Display Modes | |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Index of 3D Printed Terrain Stl Files | Yodaking | 3D Printing | 407 | March 20th, 2024 08:32 PM |
The BOOKS of Heroscape INDEX | Revdyer | Official Units | 100 | March 20th, 2024 05:32 PM |
The Index 2.0: Mmirg's Index of Excellent Scaper Threads | 1Mmirg | Scapers Online | 51 | July 28th, 2023 05:51 PM |
Index of Heroscape Software | bmaczero | Software | 17 | September 25th, 2022 03:49 PM |
Tried & True Classic Customs Index (Image Heavy) | NecroBlade | Custom Units & Army Cards | 45 | November 4th, 2010 06:37 PM |