Index of Classic Heroscape .stl files

[Tornado]

Awesome.
Any word on the resin print tuk?

[superfrog]

Originally Posted by White Knight

Some Christmas angels!

Minions of Utgar
Minion of Utgar 1 (matte)
Minion of Utgar 2 (matte)
Minion of Utgar 3 (matte)

I don't know what kind of Christmas you're celebrating but mine is usually a bit less demonic

[japes]

Originally Posted by TREX

Has anyone printed any of the matte scans in resin? Ive been debating switching to a resin printer for minis.

If you switch I’m gonna be asking for some favors. I have some small things I can’t get right with filament. Hot wheels scale wheels have been my kryptonite.

[Tornado]

For terrain or use on a Hot Wheels?
WK may be able to help you dial it in.

[White Knight]

Originally Posted by TREX

Nice @whiteknight , I so want to make some big ones of these for big demonesk guys.

Hopefully the details will work at larger sizes.

Originally Posted by superfrog

Even Utgar celebrates Christmas! Haha

Originally Posted by japes

If you switch I’m gonna be asking for some favors. I have some small things I can’t get right with filament. Hot wheels scale wheels have been my kryptonite.

I've printed some wheels to use for hot wheels type cars. I brought them to a school and had kids make their own cars out of wood with 3D printed wheels and pins for axles. They worked great.

[TREX]

Originally Posted by japes

If you switch I’m gonna be asking for some favors. I have some small things I can’t get right with filament. Hot wheels scale wheels have been my kryptonite.

I could probably get decent wheels off of my fdm printer but I truly hate how my supports damge some of the figures Ive printed with fdm. If I do get a resin printer it wont be very soon because Ive spent an unhealthy amount of cash on my miniatures addiction lately. When I get one and get it rolling Ill let you know though. @whiteknight , the details look about the same on the different figures Ive biggie sized so far.

[Toogwick_tuk]

I've been playing around with my printer for a couple days, and learning from the failures I've had. The axegrinders only printed the legs to me not supporting them correctly, and with Wosaga I put a lot of supports on her (maybe too many) and I've cleaned her up a bit since this photo and she's looking good enough for me. I could've oriented her to print better and faster. I'm going to try again with the axegrinders this weekend.

[White Knight]

Originally Posted by Toogwick_tuk

I've been playing around with my printer for a couple days, and learning from the failures I've had. The axegrinders only printed the legs to me not supporting them correctly, and with Wosaga I put a lot of supports on her (maybe too many) and I've cleaned her up a bit since this photo and she's looking good enough for me. I could've oriented her to print better and faster. I'm going to try again with the axegrinders this weekend.

The Axegrinders look like they pulled away from the build plate. I don't know much about resin printers, but I think that's a bed height issue.

How fragile are the figures? That's one concern I have with resin.

[Toogwick_tuk]

Yeah, that was what happened with them, but then wosaga printed with the same height fine. So, from what I figured out was that it was a combination of a weak connection between the build plate and then sticking too well to the FEP film it's printed on. I'm gonna retry them with different supports and leveling the plate again to see how it goes.

In terms of fragility of the resin, I'm using the standard anycubic grey resin that they sell, and it's not super fragile (but it depends on the sculpt). Wosaga is fairly chunky so she seems fairly durable, but I think somethin like the Tagawa Samurai archers might have some potential issues. I've also heard of some resins being more flexible than others, but I forgot where I heard that.

[White Knight]

Empress Kiova (matte)
Runa (matte)

[TREX]

Im really thinking about getting one of these fellas. Figured Id post a link.
LONGER Orange 10 3D Printer, Resin SLA 3D Printer with Touch Color Screen, Parallel LED Lighting, Off-line Printing, Self-developed Slicing Software, Temperature Warning Build Size 3.86 x 2.17x 5.5 in https://www.amazon.com/dp/B07RT7TW38..._GAt.Db9WGSDXZ

Only 165 bucks

[Tornado]

Oh man that is going to be hard to resist. Thanks for the tip!!