|
3D Printing A Forum to discuss 3D Printing |
|
Thread Tools | Search this Thread | Display Modes |
#877
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
I have some C3V figures, and I've had someone offer to send me a bunch to scan. I've put it off because I've been too busy to do the post-processing for them. Maybe soon...
|
#878
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
I tried everything setting wise on my printer and still a roll of the dice on my prints. Lately Ive got nothing but 1's. Then I took all the vat off and resin out and tested the physical parts. After tearing it apart checking everything Ive come across found three physical problems. Three burrs in different areas. Not sure if some have always been there or not. Ive had issues on and off since buying it. I tested the motor, removed the whole rail assembly checked all switches and other components. I had to scrape out the burrs in the rail with some precision tools and smoothed it out with some really fine sandpaper down inside the rail. The mechanism hooked to the build plate that travels along the z rails had the bearings knocked loose out of position. I had to put them back in and pack them in ptfe lube before reinserting it on the z rails I cleaned up. Theres still a little play in the z rod screw but everything is secure now and is smoothly traversing up and down as I test it. Im super excited. I always thought something was up that wasnt merely machine settings. All I have left is to put the two covers back on then its time to see if the fruit of my labors has done the trick. As Ive said before, sometimes its worth putting a little more money into a higher quality machine. Im betting that some of my problems came from the factory it was made in. Deburring metal parts when they are made should be part of their production process. I will get to print some more tonight after going to a funeral this evening.
Check out my ebay where you can find my custom dice trays and dicetowers: https://www.ebay.com/usr/captainamazing_jerdo |
#879
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
I had some failures in my printer yesterday. I thought it might be sticking to the FEP again. But I noticed the cover didn't fit anymore--the rail was too high. I releveled the bed, and when I did I noticed the lead screw was jamming and the motor was stalking.
I lubed everything with 3in1 oil and it worked after that. But I should do what you did and take it apart and clean everything. |
#880
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
Quote:
Check out my ebay where you can find my custom dice trays and dicetowers: https://www.ebay.com/usr/captainamazing_jerdo |
#881
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
@White Knight
. I just pulled off another complete buildplate of awesome prints. I got two swog riders and a red wyrmling to fit on one. Ill be printing it twice. I already have 3 swogs. I think seven total should do. A total of six squads of each common squad is the goal I think. That should be quite the accomplishment.
Check out my ebay where you can find my custom dice trays and dicetowers: https://www.ebay.com/usr/captainamazing_jerdo |
#882
|
|||
|
|||
Re: Index of Classic Heroscape .stl files
I find it a little odd that WhiteKnight's Avatar is a Templar Knight, but we only have 1 templar model to select from. Is there anything we can do to help? Also what printer do you guys use?
|
#883
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
Quote:
Scapedood scans |
#884
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
I have an Ender 3 and an Elegoo Mars
|
#885
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
I have a Snapmaker FDM printer and a Longer Orange 10 Resin Printer.
@White Knight , I've processed 10 build plates full of figures with no problems, and perfect prints since I ripped my machine apart and repaired it. I should have done it sooner. I was wondering why I kept getting crap prints. In this case I needed to dig deeper. As a Mechanic by trade, I generally try not to overthink problems where there shouldn't be any. Generally the problem is only skin deep. I've been super excited to print now that its not such a headache, as it should be. I'm curious to know how much scape you have printed so far on your resin printer. I have printed: -Axegrinders of Burning forge X7 Squads -Fen Hydra X2 -Death Knights of Valkrill X4 Squads -Swog Rider X4 -Fire Elemental X4 -Red Wyrmling X2 -Master Woo X1 (for @Flash_19 ) -Sir Hawthorne (for Flash_19) -Custom 4 man Yeti Squad with weapons from kitbashing. Most of all of these have been printed in the last couple days. That's 50 Scape figures and 4 kitbashed scape figures. EDIT: Currently there is a batch of 8 Heavy Gruts on the bed. I got 2 squads on there. Check out my ebay where you can find my custom dice trays and dicetowers: https://www.ebay.com/usr/captainamazing_jerdo |
#886
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
@TREX
2x Capuan Gladiators 2x Mohican River Tribe 2x Shades 5x Derpwyrm Drow 3x roman legionaries 3x phantom knights 3x death knights 3x gladiatrons 3x marro dividers 2x 4th mass line 2x 10th reg 4x zombies 4x water elementals 2x knights of Weston 2x Minions of Utgar 2x protectors of Ullar 2x aubrian Archers 2x Armoc vipers 2x sentinels of Jandar 2x green scale warriors 2x axe grinders of burning forge 1x macdirks 1x gorrilinators 1x Einar Imperium 1x microcorp agents 1x Mezzodemons 1x tul-bak-ra 1x siege Isamu 1x sir Hawthorne 1x Migol Ironwill 1x Laglor 1x sir Gilbert 1x Ornak 1x Agent Skahan |
#887
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
Roughly 192 if my mental math skills are workin. If only my printer didn't have so many fails so far. I could be even more buried in my pile of shame. Impressive WK.
Check out my ebay where you can find my custom dice trays and dicetowers: https://www.ebay.com/usr/captainamazing_jerdo |
#888
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
Most if those were for other people. The Shades and Drow are for me.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Index of 3D Printed Terrain Stl Files | Yodaking | 3D Printing | 407 | March 20th, 2024 08:32 PM |
The BOOKS of Heroscape INDEX | Revdyer | Official Units | 100 | March 20th, 2024 05:32 PM |
The Index 2.0: Mmirg's Index of Excellent Scaper Threads | 1Mmirg | Scapers Online | 51 | July 28th, 2023 05:51 PM |
Index of Heroscape Software | bmaczero | Software | 17 | September 25th, 2022 03:49 PM |
Tried & True Classic Customs Index (Image Heavy) | NecroBlade | Custom Units & Army Cards | 45 | November 4th, 2010 06:37 PM |