|
Custom Units & Army Cards Fan-created HS army cards for units, glyphs, and equipment |
|
Thread Tools | Search this Thread | Display Modes |
#61
|
||||
|
||||
Re: White Knight's Custom 3D Printed Figures
Quote:
Check out my ebay where you can find my custom dice trays and dicetowers: https://www.ebay.com/usr/captainamazing_jerdo |
#62
|
||||
|
||||
Re: White Knight's Custom 3D Printed Figures
Quote:
1) curling at the edges (happens often on wide builds) 2) bed temperature too low 3) dirty bed 4) wrong starting height of bed 5) blobs or curling in the extrusion which are hit by the nozzle and knock the part free Also, I add hairspray to my bed before each print to help it stick. |
#63
|
||||
|
||||
Re: White Knight's Custom 3D Printed Figures
It may be dirty in the center of the bed where I printed all of the figurines. Then again I heard quite a few people with my machine say they had problems that way. Some also mentioned hair spray. Thanks for the tips. Dewback trooper.
Check out my ebay where you can find my custom dice trays and dicetowers: https://www.ebay.com/usr/captainamazing_jerdo |
#64
|
||||
|
||||
Re: White Knight's Custom 3D Printed Figures
Like this?
The Battle Droid on the left is a Star Wars Mini. The other battle droid, the Dewback Rider, Wo-Sa-Ga, the Large Air Elemental, and Isamu are 3D printed. I bought some clear filament that I'm going to use for the Air Elemental. That one was just a test. I'm still working on painting the Dewback Rider and Wo-Sa-Ga. The Battle Droid and Isamu are finished painting. The Battle Droid isn't perfect, but now I can field a whole lot of them--and on the one game we played with the 3d printed droids I never even thought about how they looked. I'll upload the files when I finish painting. And I have a few more goodies I've been working on that I'll post when I finish painting them. |
#65
|
||||
|
||||
Re: White Knight's Custom 3D Printed Figures
Quote:
Check out my ebay where you can find my custom dice trays and dicetowers: https://www.ebay.com/usr/captainamazing_jerdo |
#66
|
||||
|
||||
Re: White Knight's Custom 3D Printed Figures
Quote:
Try cleaning first. If that doesn't work, take some pictures of what you are printing and your printer setup. Also, let me know the temperature of your print bed, the material of your print bed, and the material filament are you using. Also, let me know how your filament is (since it came out of the vacuum bag with the desiccant). Failed prints can be REALLY annoying (I just spent 2 months tracking down and fixing a problem with my printer). But it's a little less annoying if you have someone else to help try to diagnose the problem. |
#67
|
||||
|
||||
Re: White Knight's Custom 3D Printed Figures
50c print bed temp. It might be a cleaning issue because my first 6 prints came out beautiful with no problem. What to clean it with? I know its calibrated because it doesnt pull up till after quite awhile. I have part of my last print still stuck to the bed.
Check out my ebay where you can find my custom dice trays and dicetowers: https://www.ebay.com/usr/captainamazing_jerdo |
#68
|
||||
|
||||
Re: White Knight's Custom 3D Printed Figures
Maybe I should use the raft option?
Check out my ebay where you can find my custom dice trays and dicetowers: https://www.ebay.com/usr/captainamazing_jerdo |
#69
|
||||
|
||||
Re: White Knight's Custom 3D Printed Figures
Your image above isn't showing up for me.
Would I want it to be everything I love...sure...but that's just not realistic so I'm going to focus on finding things that will make me unhappy and work on fixing those. |
#70
|
||||
|
||||
Re: White Knight's Custom 3D Printed Figures
It shows up on my laptop but not my phone.
Check out my ebay where you can find my custom dice trays and dicetowers: https://www.ebay.com/usr/captainamazing_jerdo |
#71
|
||||
|
||||
Re: White Knight's Custom 3D Printed Figures
Clean the bed with acetone. I use it for both PLA and ABS.
Try that before you try the raft. You might also want to increase your bed temperature to 60C or higher. Have you tried to reprint one of the first parts you printed to see if it's the printer or the new print? |
#72
|
||||
|
||||
Re: White Knight's Custom 3D Printed Figures
Quote:
Check out my ebay where you can find my custom dice trays and dicetowers: https://www.ebay.com/usr/captainamazing_jerdo |
|
Thread Tools | Search this Thread |
Display Modes | |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
White Knight's custom army cards: Updated 11-7-2011 | White Knight | Custom Units & Army Cards | 43 | December 30th, 2017 06:44 PM |
White Knight's D&D customs | White Knight | Dungeons & Dragons Customs | 38 | December 17th, 2017 02:33 AM |
White Knight's Custom 3D Printed Terrain | White Knight | Custom Terrain & Obstacles | 30 | August 25th, 2016 10:14 PM |
White Knight's Custom Sidewalks and Buildings | White Knight | Custom Terrain & Obstacles | 17 | January 26th, 2015 11:12 PM |