|
3D Printing A Forum to discuss 3D Printing |
|
Thread Tools | Search this Thread | Display Modes |
#397
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
Quote:
The scale is 2540 on the Ender 3. (The models are all in inches, so 25.4 mm per inch * 100 for some reason.) Most of the time I add my supports in CURA, so that would mean uploading the g-code which would be Ender 3 specific. Sometimes, for ease of removal, I'll make my own tree supports. If I do that, I'll try to add those files as well. I stopped uploading models with supports because TREX was just removing my supports anyways. I can't promise anything though--higher resolution models are higher priority right now. 3D printing can be daunting at first. If you are having issues, feel free to PM me or post here and I can help you work through them. |
#398
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
Quote:
I think most of the issues come from the cheap PLA I'm using. I'll probably buy a better one if I can't figure out what's happening. Right now I'm following this advice: https://www.simplify3d.com/support/p...oubleshooting/ Anyway, has anyone tried printing with a 0.2mm nozzle? Also, do you plan to add the AOTP models? |
#399
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
Quote:
We'll see about the AOTP figures. I have all of them, but I'd like to finish the classic and C3V figures first. Are there any that you really want models for? |
#400
|
|||
|
|||
Re: Index of Classic Heroscape .stl files
I’ve used a 2mm nozzle. Longer print, better detail, easier to clog. Nothing different otherwise
|
#401
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
Quote:
So, not worth the effort? When could you use it? Just playing around... |
#402
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
So miniatures look better with a .2mm nozzle?
|
#403
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
Quote:
https://www.amazon.com/PULUZ-Portabl.../dp/B072148WM9 Check out my ebay where you can find my custom dice trays and dicetowers: https://www.ebay.com/usr/captainamazing_jerdo |
#404
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
Quote:
It comes with a new profile too! Just playing around... |
#405
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
I have a little down time at work so I've been seeing what various 3D printing sites can do with some of the files. It's interesting but also seems many of them can't handle either the size of the miniatures or the way they are supported. Shapeways just can't print anything smaller than Gurei-Oni it seems. I did laugh at them when they told me the Fen Hydra would only be able to be done in metal like bronze, brass, etc. Again this was more of an experiment, I will be getting my own 3D printer in the future.
|
#406
|
|||
|
|||
Re: Index of Classic Heroscape .stl files
Quote:
@Guillermo-Tell I think that answers your question too |
#407
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
@whiteknight
, do you think that light box I purchased and linked above would work well for photographing minis for stls? I'm supposed to get it tomorrow. I'm going to see about getting or making a turntable to sit in the bottom, and I'll be setting my camera, or phone up next to it on a tripod. I did this also for photographing the 1000+ miniatures I've painted that I have at my house.
Check out my ebay where you can find my custom dice trays and dicetowers: https://www.ebay.com/usr/captainamazing_jerdo |
#408
|
||||
|
||||
Re: Index of Classic Heroscape .stl files
Quote:
Some notes: - The LEDs will cause shiny spots. You'll want to use the matte spray to get the best results. - I've heard you can get good scans of a mini without any background (see here), but I've never tried it and don't know if it will work with 3DF Zephyr - Otherwise, your turntable will need a print on it to give the photogrammetry program background references. Mine needed walls so that the figure is entirely within the background. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Index of 3D Printed Terrain Stl Files | Yodaking | 3D Printing | 407 | March 20th, 2024 08:32 PM |
The BOOKS of Heroscape INDEX | Revdyer | Official Units | 100 | March 20th, 2024 05:32 PM |
The Index 2.0: Mmirg's Index of Excellent Scaper Threads | 1Mmirg | Scapers Online | 51 | July 28th, 2023 05:51 PM |
Index of Heroscape Software | bmaczero | Software | 17 | September 25th, 2022 03:49 PM |
Tried & True Classic Customs Index (Image Heavy) | NecroBlade | Custom Units & Army Cards | 45 | November 4th, 2010 06:37 PM |