|
Heroes of Star Wars Scape The place for all your Star Wars customs needs. |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
||||
|
||||
The Holocron of IG-88D
The Holocron of IG-88D SSE 2: Droid Revolution Figure Card: Rectangular Cards
Spoiler Alert!
The figure used for this unit is a modified Star Wars figure from the Rebel Storm set. Its model number and name are #48/IG-88 ______________________________________________________________ Character Bio - After IG-88A gained "sentience programming" and killed much of the Project Phlutdroid personnel, IG-88D was activated, named by order of activation, and given the same sentience programming from the first unit. With the other IG-88s, as well as IG-72, the five droids managed to escape the factory and leave a swath of destruction in their wake. On the foundry world of Mechis III, the IG-88's began planning a galaxy wide droid rebellion. With IG-88A impersonating the now-deceased administrator of Mechis III, and IG-88B acting as the bounty hunter "face" of the group, IG-88C and D were left to personally oversee the manufacturing of their plan and act as sentries for Mechis III. (Wookieepedia) ______________________________________________________________ -Rulings and Clarifications- • N/A ______________________________________________________________ -Combinations and Synergies- Synergy Benefits Received: Classic: • N/A HoSS: • R2-D2 : Astromech Internal Systems As a Droid, IG-88D can benefit from R2-D2's ASTROMECH INTERNAL SYSTEMS special power. • IG-88A : Droid Revolution As a droid, IG-88D may benefit from IG-88A's DROID REVOLUTION turn bonding special power. •IG-88C : Synchronized Assault As a Droid Hero, IG-88D can benefit from IG-88C's SYNCHRONIZED ASSAULT special power. • JABBA THE HUTT : Underworld Connections Being a figure who follows the Independent faction, IG-88D may benefit from Jabba the Hutt's UNDERWORLD CONNECTIONS turn bonding special power. C3V, SoV & Marvel: • N/A Synergy Benefits Offered: Classic: • N/A HoSS: • N/A C3V, SoV & Marvel: • N/A ______________________________________________________________ -Strategy, Tactics and Tips- • TBA -Power Rankings- • TBA -Heroscapers Community Contributions- • First play test: Yodaking • Second play test: Koolster • Third play test: Trex, 2nd Team Test • Fourth play test: Tia-Pan • Art by: mac122 Last edited by mac122; February 16th, 2020 at 06:15 PM. Reason: Added rectangular cards |
#2
|
||||
|
||||
Re: The Holocron of IG-88D
IG-88D
Independent Droid Unique Hero Assassin Calculating Medium 6 Points: 130 Life 4 Move 5 Range 7 Attack 3 Defense 5 VIBROBLADE Add 1 die to IG-88D's attack when attacking an adjacent figure. PARALYSIS CORD Start the game with one grey Paralysis Marker. Before or after moving with IG-88D, you may choose a small or medium Unique Hero within 2 clear sight spaces and roll the 20-sided die. If you roll an 11 or higher, place the Paralysis Marker on the chosen figure's Army Card. While the Paralysis Marker is on its card, the chosen figure is considered paralyzed and may not move, attack, or make leaving engagement attacks, and rolls 2 fewer defense dice when attacked. If that figure receives one or more wounds or has one or more wound markers removed from its Army Card, remove the Paralysis Marker from the game. BALLISTIC ANALYSIS When IG-88D rolls defense dice against a normal attack from a non-adjacent figure, one shield will block all damage. Last edited by Yodaking; August 6th, 2015 at 11:40 PM. |
#3
|
||||
|
||||
Re: The Holocron of IG-88D
To completed your IG-88D mod, removing one gun and replacing it with a vibro blade. The wookiepedia description of a Vibroblade says it is basically a short sword so making a decent Vibroblade is pretty easy and can be achieve many different ways.
For me, my blade came from the figure seen below. It is from the HorrorClix Freakshow line, #34 (Carny), #35 (Carny), & #36 (Skell). $0.25 at Miniature Market. You can find a similar short sword from lots of different sources though. Remove the small gun barrel on your IG-88 model but leave the handle poking out from the bottom as well as most of the part of the gun directly over the droids hand. Trim unneeded plastic from that section so that it now looks like a sword hilt. You will be using a bit of wire to 'pin' the sword blade to the hilt in order to make sure the blade stays in place once you are done. Drill a small hole into the hilt as well as the bottom of the blade. Shove the wire into the hole you made in the hilt. Snip the wire off, apply some glue to the bottom of the blade and shove the blade down onto the remaining wire until you have a good fit. Paint the blade & hilt as desired and you are done. |
#5
|
||||
|
||||
Re: The Holocron of IG-88D
The following needs to be added to IG-88D's synergies:
• JABBA THE HUTT : Underworld Connections Being a figure who follows the Independent faction, IG-88D may benefit from Jabba the Hutt's UNDERWORLD CONNECTIONS turn bonding special power. |
#6
|
||||
|
||||
Re: The Holocron of IG-88D
What happens to the grey Paralisys Marker if I do not roll an 11 or higher?
My trade thread, now with Classic, C3V and SoV units! All units come with cards. http://www.heroscapers.com/community...ad.php?t=51709 |
#7
|
||||
|
||||
Re: The Holocron of IG-88D
Nothing and you may continue to roll for Paralysis Cord.
And the Lord said unto John, "Come forth and you will receive eternal life." But John came fifth, and won a toaster. My Customs |
|
Thread Tools | Search this Thread |
Display Modes | |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
The Holocron of R2-D2 | Fi Skirata | Heroes of Star Wars Scape | 18 | August 7th, 2020 11:36 PM |
The Holocron of 2-1B | Heroscaper Guy | Heroes of Star Wars Scape | 229 | December 7th, 2019 11:28 PM |
The Holocron of IG-88C | Yodaking | Heroes of Star Wars Scape | 5 | May 5th, 2019 03:27 PM |
The Holocron of IG-88B | Yodaking | Heroes of Star Wars Scape | 17 | January 27th, 2016 09:43 PM |
The Holocron of AT-ST | Yodaking | Heroes of Star Wars Scape | 113 | March 19th, 2015 08:51 AM |