C3G Poker-Sized Card Project

[japes]

Originally Posted by Spuke Boy

Since I had some extra free time, I created a tool similar to the X2-Printer for the poker-sized cards. It currently only has three units and one glyph (taken from the photobucket album), and for demonstration purposes I set it to add 3 markers per Superman selected.
When printing, it arranges the cards on a 3x3 grid, although since you've been talking about 8 cards per page, I suppose I'll be changing it to a 2x4 grid soon and make the cards larger.

It's still an early version, but I thought I might as well put it out there to give you an idea of how it works and to collect feedback to improve it.

The tool can be found here: http://cardprinter.bplaced.net/

I will check it out when I get home. Thanks.

Also yes 2x4 lets you print them real sized. 3x3 only works with edge to edge printers with minor clipping. I create the cards with bleed margins so they can be trimmed. It’s standard for professionally printed material so that’s my default. I can get you the actual size of the card plus bleed later.