|
Custom Terrain & Obstacles For Custom terrain, buildings, and other misc. obstacles |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
||||
|
||||
Need Help! Laser-Cutting/ Engraving Terrain?
Hey everyone,
My local library has a laser cutter and engraver that's free to use. I'm thinking about getting some wood and/or insulation foam and laser cutting heroscape terrain/ engraving the hexagon pattern on them (e.g., laser cutting it into the shape of a 24-hex piece, then laser engraving that shape with a hexagonal pattern). It doesn't need to be stackable per-se, this would just be for top level/base level terrain. Anybody have advice on how they'd go about this? I have no experience making custom terrain, but the free Maker Space is too good not to use. |
#2
|
||||
|
||||
Re: Need Help! Laser-Cutting/ Engraving Terrain?
Solved! Found these vector files online:
https://www.etsy.com/listing/7824692...m2=14821205487 But I'm living this page up in case anyone else wants to take advantage of it. There are also vectors of all the Heroscape symbols necessary for custom dice here https://www.heroscapers.com/communit...o=file&id=2666 |
#3
|
||||
|
||||
Re: Need Help! Laser-Cutting/ Engraving Terrain?
Hey,
Just noticed this thread. I already practiced a lot laser cutting and engraving (+3D printing but that's not our subject here) for robotics so here are a few things I can recommend : General thoughts : - Laser cutting is not really consistent to make heroscape terrain, as you can create only in 2 dimensions (x, y) and the third one (z) can be changed only with engraving (long process with a laser) and is dependent on the basic thickness of your material. - All material does not fit for laser cutting. A lot of plastics produces toxic gas and thus are forbidden for such use. Others just burns while cutting.... this has to be checked beforehand. To do heroscape tiles : You have to find the correct material. From what I said previously, the best one would be of the same thickness of a HS tile..! It is possible to engrave the whole top of the hex to get something really similar to official tiles. To do this, we need a svg file of the top view of the tiles, that can be found with those files. But here the export is not trivial without a specialized software. Then you just need to get the external tile shape profile for the laser cut. This one is quite easy and can be obtained from the 3D file with free tools like tinkedcad (Export => svg). Here is a result for instance, for a single hex, with a basic tile top i.e. no realistic engraving (just a .png preview, the file should be in .svg for laser cut/engrave) : --- As a last note, it would be nice to use a CNC to remove the all external edge of the tiles (red zone engraved bellow) to fasten the engraving process but also the interior of the tiles, to get more practical tiles. This should not be hard to do. Otherwise, engraving is always made before -and in the same process as- laser-cutting. That's the only way to guarantee correct alignment between cutting and the engraving. |
#4
|
||||
|
||||
Re: Need Help! Laser-Cutting/ Engraving Terrain?
What do you think about laser-engraving blank dice?
Quote:
|
#5
|
||||
|
||||
Re: Need Help! Laser-Cutting/ Engraving Terrain?
You'll have to check that the dice material can be engraved using a laser (should be ok for main materials I can find : wood or acrylic dice).
The only difficulty I see is to place correctly the die on your laser cutter surface to be 100% sure you center correctly the engraving. Other than that, would be a really nice solution ! You can find a nice tuto here. You'll notice the main point of the tuto is about getting the dice on the correct location for engraving. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Kickstarer Laser Cut Terrain *Uber cool* | Dusty27 | Custom Terrain & Obstacles | 10 | May 9th, 2012 12:18 PM |
Any Ideas for laser cut terrain objects? | samthegoat | Custom Terrain & Obstacles | 0 | April 12th, 2012 07:38 PM |
Diet for Cutting: Advice? | scorpiusx | General | 24 | March 20th, 2010 03:45 PM |
New to Customizing - q's on cutting and bending HS figures | NormanJFin | Custom Units & Army Cards | 6 | March 26th, 2008 08:04 AM |
Hasbro cutting 200 jobs in Mass. | AnakinOU | HeroScape News | 19 | January 15th, 2008 10:46 PM |