View Single Post
  #60  
Old January 10th, 2021, 02:04 PM
White Knight's Avatar
White Knight White Knight is offline
Heroscapers Project Extraordinaire
 
Join Date: April 15, 2010
Location: USA - TX - Houston (Clear Lake)
Posts: 5,218
Images: 13
Blog Entries: 1
White Knight is a penguin with a machine gun White Knight is a penguin with a machine gun White Knight is a penguin with a machine gun White Knight is a penguin with a machine gun White Knight is a penguin with a machine gun White Knight is a penguin with a machine gun White Knight is a penguin with a machine gun White Knight is a penguin with a machine gun White Knight is a penguin with a machine gun White Knight is a penguin with a machine gun White Knight is a penguin with a machine gun White Knight is a penguin with a machine gun
Re: C3V/SoV 3D Printable Proxies

Quote:
Originally Posted by robbdaman View Post
Quote:
Originally Posted by White Knight View Post
Quote:
Originally Posted by robbdaman View Post
Not sure if all the raw scans are the same typically but I've resized up 600% to get to where the ones I've done look proper sized. As far as the ones WK has completed they need to be enlarged 2540% I believe.
I moved this discussion to the C3V thread, but in short: the RAW scans are NOT to scale. They need to be sized by the base or by the size of the actual figure.

During processing is when I correct the scale.
How do you determine scale? I've just trial and errored it. If I can find exact measurements of a figure somewhere I can adjust to exact size but unless I have one I can't just measure it myself.
SCALE
Many of the C3V figures and the D1-D3 figures have non-standard base sizes.

Here are the correct base sizes for various figures so that the figure can be scaled correctly:

Figure: Diameter (in inches)
D1-D3 D&D figures: 1.00"
Gorilla Troopers: 1.558"
Heroclix (Soldier and others): 1.360"
Quahon (outside toe to outside toe wide): 2.1"
Skull demon (Skeletons, Nhih Scrihr, Cathar): 1.190"
Varkaanan Wolves: 1.565"
Agaumo: 1.9"
Zettian Deathwings (across the flats): .987"
Zombie Hulk: 1.9"
Major J15: 2.0"

For ones not listed, look for ones from the same company. For example, the Varkaanan are from Confrontation. So are the Cathar Spearmen. So the base sizes are the same.

If you have a specific figure you are unsure about, post it here and I'll try to give more exact information. I don't have all the figures, which is why I measured the bases before returning them to their owner.
Reply With Quote