Heroscapers

Heroscapers (https://www.heroscapers.com/community/index.php)
-   Custom Units & Army Cards (https://www.heroscapers.com/community/forumdisplay.php?f=20)
-   -   White Knight's Custom 3D Printed Figures (https://www.heroscapers.com/community/showthread.php?t=50778)

White Knight September 1st, 2014 06:49 PM

White Knight's Custom 3D Printed Figures
 
WHITE KNIGHT'S 3D PRINTED FIGURES

I got a 3D printer and started printing some figures for Heroscape. The resolution isn't the best (especially for faces), but I'm still learning. Also, it seems like the black PLA filament has better resolution than the white PLA. I haven't tried ABS filament yet--that might give better resolution as well.


Knights of Weston
Knight #1 .STL file
Knight #2 .STL file
Weapons and Shields for Knights .STL file

https://lh3.googleusercontent.com/u_...=w1024-h768-no


Bases for Fyorlag Spiders
(I picked the spiders up last Halloween at Michaels and then painted them to match the Fyorlags. Then I 3D printed bases for mounts.)
Spider Base .STL file

https://lh3.googleusercontent.com/6Z...=w1024-h682-no


Beholder
Beholder .STL file

To print better on my 3D printer, I split the above file into 4 files:
Beholder 1 .STL file
Beholder 2 .STL file
Beholder 3 .STL file
Beholder 4 .STL file

https://lh3.googleusercontent.com/Wy...=w1024-h768-no


Roman Soldiers (28mm and Heroscape scale)
Roman Soldier .STL file (no sword or shield)
Weapons and Shields for Roman Soldier .STL file

https://lh3.googleusercontent.com/cr...=w1024-h768-no

Skeleton Warriors
Skeleton Warrior .STL file fatter legs
Skeleton Warrior .STL file normal
(uses the same weapons and shield file as the Roman soldiers)

https://lh3.googleusercontent.com/lq...=w1024-h768-no


Pidgey
Pidgey .STL file
Pidgey base .STL file

https://lh3.googleusercontent.com/uY...=w1024-h768-no


Lapras
Lapras .STL file
Lapras right side .STL file
Lapras left side .STL file

https://lh3.googleusercontent.com/4J...=w1024-h768-no

Rattata
Rattata left side .STL file
Rattata right side .STL file

http://i795.photobucket.com/albums/y...psd9095c2d.jpg


Flygon
Flygon back .STL file
Flygon front .STL file
Flygon wings .STL file

https://lh3.googleusercontent.com/4r...=w1024-h768-no


Gligar
Gligar front .STL file
Gligar back .STL file
Gligar left wing .STL file
Gligar right wing .STL file

https://lh3.googleusercontent.com/H5...=w1024-h768-no


Gastly
Gastly top .STL file
Gastly bottom .STL file

https://lh3.googleusercontent.com/7W...=w1024-h768-no


Furret
Furret top .STL file
Furret bottom .STL file

https://lh3.googleusercontent.com/Pz...=w1024-h768-no


Bayleaf
Bayleaf complete .STL file
Bayleaf right side .STL file
Bayleaf left side .STL file

https://lh3.googleusercontent.com/yK...=w1024-h768-no


Glalie
Glalie top .STL file (coming soon)
Glalie bottom .STL file (coming soon)

https://lh3.googleusercontent.com/J-...=w1024-h768-no


Heliolisk
Heliolisk complete .STL file
Heliolisk back .STL file
Heliolisk front .STL file

https://lh3.googleusercontent.com/RQ...=w1024-h768-no


Pangoro
Pangoro complete .STL file
Pangoro front .STL file
Pangoro back .STL file

https://lh3.googleusercontent.com/8V...=w1024-h768-no


Jabba the Hutt and 3x Yodas
Jabba the Hutt .STL file
Yoda version 1 .STL file
Yoda version 2 .STL file
Heroscape Peanut Base
Heroscape Single Base

https://lh3.googleusercontent.com/UP...=w1024-h768-no

https://lh3.googleusercontent.com/v1...=w1024-h768-no



Acklay
Acklay1.STL file
Acklay2 .STL file
Acklay3 .STL file
Acklay4 .STL file
Acklay5 .STL file
Acklay6 .STL file
Acklay7 .STL file
Acklay8 .STL file
Acklay Complete .STL file

https://lh3.googleusercontent.com/p-...=w1024-h768-no

Rancor
Rancor1 .STL file
Rancor2 .STL file
Rancor3 .STL file
Rancor4 .STL file
Rancor5 .STL file
Rancor6 .STL file
Rancor7 .STL file
Rancor8 .STL file
Rancor9 .STL file
Rancor10 .STL file
Rancor11 .STL file
Rancor12 .STL file
Rancor13 .STL file
Rancor14 .STL file
Rancor Complete .STL file

https://lh3.googleusercontent.com/fm...=w1024-h768-no

B1 Battle Droids
B1 Droids .stl
B1 Droids no supports .stl
https://lh3.googleusercontent.com/2k...0=w477-h318-no

https://lh3.googleusercontent.com/op...=w1110-h740-no

Gungans (Militia, Shieldbearer, Kaadu Riders)
(Ready for my Gungan playtests)
Gungan Infantry .stl
Gungan Infantry no supports .stl


Gungan Shieldbearer .stl
Gungan Shield .stl

Gungan Shieldbearer no supports .stl


Kaadu Rider .stl
https://drive.google.com/open?id=1d9...b72esc1tc0y59T

https://lh3.googleusercontent.com/u2...=w1110-h740-no

https://lh3.googleusercontent.com/4G...=w1110-h740-no

https://lh3.googleusercontent.com/xb...=w1110-h740-no

https://lh3.googleusercontent.com/Hj...=w1110-h740-no

Dewback Riders
Dewback Rider no supports

Dewback Rider with arm supports


https://lh3.googleusercontent.com/nX...=w1110-h740-no

https://lh3.googleusercontent.com/R_...=w1110-h740-no

Templar Calvary
Templar Calvary .stl

https://lh3.googleusercontent.com/pF...=w1110-h740-no

Isamu
Isamu .stl

https://lh3.googleusercontent.com/3b...=w1110-h740-no

Horned Skull Brutes
Horned Skull Brute .stl
Horned Skull Brute no supports .stl

https://lh3.googleusercontent.com/38...=w1110-h740-no

Skeletons (that look more like mummies)
Skeleton with Spear .stl
Skeleton with Spear no supports .stl

https://lh3.googleusercontent.com/vf...=w1110-h740-no
https://lh3.googleusercontent.com/qN...=w1110-h740-no

Large Earth Elemental
Large Earth Elemental .stl


https://lh3.googleusercontent.com/du...=w1110-h740-no

Fire Elementals
Large Fire Elemental .stl
Medium Fire Elemental .stl

https://lh3.googleusercontent.com/6O...=w1110-h740-no

https://lh3.googleusercontent.com/gS...=w1110-h740-no

Air Elementals
Large Air Elemental .stl
Medium Air Elemental .stl

https://lh3.googleusercontent.com/z2...=w1110-h740-no

https://lh3.googleusercontent.com/Ev...=w1110-h740-no

Large Water Elementals
Large Water Elemental .stl

https://lh3.googleusercontent.com/3s...=w1110-h740-no

https://lh3.googleusercontent.com/dT...=w1110-h740-no



HoSS 3D Models



AT-ST Complete
AT-ST Head
AT-ST Legs
Gamorean Guard 1
Gamorean Guard 2
Jawa

Rebel Trooper
Stormtrooper

Tuskan Raider

Bossk
C3PO
Princess Leia
A-Zulmin
Emperor Palpatine
Boba Fett
Yoda
Darth Maul

https://scontent-dfw5-1.xx.fbcdn.net...5d&oe=5D5A321F

Porkins September 1st, 2014 07:55 PM

Re: White Knight's Custom 3D Printed Figures
 
Wow, that's incredible! Are you making the computer models from scratch, or downloading from somewhere? I like the Yoda; Jabba will be a good figure to have soon...

White Knight September 1st, 2014 09:14 PM

Re: White Knight's Custom 3D Printed Figures
 
Quote:

Originally Posted by Porkins (Post 1966566)
Wow, that's incredible! Are you making the computer models from scratch, or downloading from somewhere? I like the Yoda; Jabba will be a good figure to have soon...

I downloaded Yoda and Jabba and the soldiers from the internet (Autodesk.com). I did the Jabba and Yoda figures because I knew the real miniatures were expensive.

I'm learning Blender, so I made a Pokemon for my son (Pangoro) from scratch. Human figures will be much harder.

Porkins September 8th, 2014 04:44 PM

Re: White Knight's Custom 3D Printed Figures
 
How about Droidekas?

Or Rancor? Or a poseable Rancor that actually looks about the right scale?

A3n September 8th, 2014 05:27 PM

Re: White Knight's Custom 3D Printed Figures
 
For larger figures like Jabba where the resolution steps are noticeable it might be worth your while to experiment with spraying a mist of Acetone over them. But great work here regardless. :up:

caps September 8th, 2014 05:43 PM

Re: White Knight's Custom 3D Printed Figures
 
Very cool. Thanks for sharing, man.

Arch-vile September 8th, 2014 06:19 PM

Re: White Knight's Custom 3D Printed Figures
 
Holy cow, those are awesome. I love the pokemon! Do you have cards for your non-Generation 1 pokemon?

MementoMori September 9th, 2014 03:30 AM

Re: White Knight's Custom 3D Printed Figures
 
What printer did you use? I'm planning to get a RepRap Prusa i3 in a couple of weeks.

White Knight September 9th, 2014 07:43 AM

Re: White Knight's Custom 3D Printed Figures
 
Quote:

Originally Posted by A3n (Post 1968129)
For larger figures like Jabba where the resolution steps are noticeable it might be worth your while to experiment with spraying a mist of Acetone over them. But great work here regardless. :up:

I've been using PLA filament for my parts. I heard that acetone only works for ABS. When I try ABS, I'll probably try acetone as well to see if it smooths out the lines. The PLA is also pretty gummy and difficult to sand.

I'm still getting familiar with my printer settings. I'm still trying to see if I can reduce those resolution steps.

Quote:

Originally Posted by MementoMori (Post 1968190)
What printer did you use? I'm planning to get a RepRap Prusa i3 in a couple of weeks.

Velleman K8200.
@Arch-vile : No new cards for the non-Kanto Pokemon yet. I've been wanting to start a Johto Pokemon thread, but the 3D printer and lots of other projects have gotten in the way.

Gurei-Ornery September 9th, 2014 07:48 AM

Re: White Knight's Custom 3D Printed Figures
 
Nice work. Curious to see what the K8200 is capable of once you get to dial in all of the settings. I would love to get a copy of your Beholder .stl file. I would print an army of them.

White Knight October 23rd, 2014 12:15 AM

Re: White Knight's Custom 3D Printed Figures
 
Added some .STL files to the first post, and added pictures of the painted 3D printed figures:

http://i795.photobucket.com/albums/y...ps4eb36d9c.jpg

http://i795.photobucket.com/albums/y...ps8c3d50bc.jpg

http://i795.photobucket.com/albums/y...ps2b9e9638.jpg

http://i795.photobucket.com/albums/y...ps972b9b7a.jpg

http://i795.photobucket.com/albums/y...ps6c76a732.jpg

http://i795.photobucket.com/albums/y...psf2c21320.jpg

http://i795.photobucket.com/albums/y...ps4eaa78d5.jpg

I 3D printed a Jetpack for a modifed Boba Fett figure:
http://i795.photobucket.com/albums/y...psca14e057.jpg

http://i795.photobucket.com/albums/y...ps2b20263f.jpg

Not User Name October 23rd, 2014 12:28 AM

Re: White Knight's Custom 3D Printed Figures
 
All I can say is Wow. Those are awesome!


All times are GMT -4. The time now is 05:50 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.