PDA

View Full Version : Index of 3D Scans of Figures


scapedood
May 6th, 2020, 11:43 PM
I decided to make my own thread for this; A little while back, I got a 3D scanner and have been using it to get high detail scans of all the figures I own.

I'm putting my scans on thingiverse, If they take it down, i'll find another avenue, but it's very easy to work with and comes with preview views of all the scans whenever you scan a model.

https://www.thingiverse.com/lyte3d/designs

UPDATE: Thanks to some help from my play group and Amarant, I have sources for all the models and will have all of them scanned in due time.

Here is the list of all figures and their statuses:

10th Regiment of Foot (https://www.thingiverse.com/thing:4577473)Scanned
4th Massachusetts Line (https://www.thingiverse.com/thing:4577474)Scanned
Acolarh (https://www.thingiverse.com/thing:4577500)Scanned
Agent Carr (https://www.thingiverse.com/thing:4343002)Scanned
Agent Skahen (https://www.thingiverse.com/thing:4356898) (Same Model as Nikita Agents - 3)Scanned
Air Elemental (https://www.thingiverse.com/thing:4577501)Scanned
Airborne Elite (https://www.thingiverse.com/thing:4345949)Scanned
Alastair MacDirk (https://www.thingiverse.com/thing:4653550)Scanned
Ana Karithon (https://www.thingiverse.com/thing:4379040)Scanned
Anubian Wolves (https://www.thingiverse.com/thing:4595392)Scanned
Arkmer (https://www.thingiverse.com/thing:4341669)Scanned
Armoc Vipers (https://www.thingiverse.com/thing:4577469)Scanned
Arrow Gruts (https://www.thingiverse.com/thing:4366561)Scanned
Ashigaru Harquebus (https://www.thingiverse.com/thing:4595379)Scanned
Ashigaru Yari (https://www.thingiverse.com/thing:4595409)Scanned
Atlaga the Kyrie Warrior (https://www.thingiverse.com/thing:4577481)Scanned
Aubrien Archers (https://www.thingiverse.com/thing:4595410)Scanned
Axegrinders of Burning Forge (https://www.thingiverse.com/thing:4595376)Scanned
Black Wyrmling (https://www.thingiverse.com/thing:4577495)Scanned
Blade Gruts (https://www.thingiverse.com/thing:4366556)Scanned
Blastatrons (https://www.thingiverse.com/thing:4653564)Scanned
Blue Wyrmling (https://www.thingiverse.com/thing:4577489)Scanned
Brandis Skyhunter (https://www.thingiverse.com/thing:4341672)Scanned
Brave Arrow (https://www.thingiverse.com/thing:4577488)Scanned
Braxas (https://www.thingiverse.com/thing:4345961)Scanned
Brunak (https://www.thingiverse.com/thing:4346020)Scanned
Capuan Gladiators (https://www.thingiverse.com/thing:4653562)Scanned
Chardris (https://www.thingiverse.com/thing:4577499)Scanned
Charos (https://www.thingiverse.com/thing:4340880)Scanned
Concan the Kyrie Warrior (https://www.thingiverse.com/thing:4577483)Scanned
Crixus (https://www.thingiverse.com/thing:4359947)Scanned
Cyprien Esenwein (https://www.thingiverse.com/thing:4379052)Scanned
Darrak Ambershard (https://www.thingiverse.com/thing:4379043)Scanned
Deadeye Dan (https://www.thingiverse.com/thing:4340879)Scanned
Death Chasers of Thesk (https://www.thingiverse.com/thing:4366568)Scanned
Death Knights of Valkrill (https://www.thingiverse.com/thing:4341942)Scanned
Deathreavers (https://www.thingiverse.com/thing:4653607)Scanned
Deathstalkers (https://www.thingiverse.com/thing:4653561)Scanned
Deathwalker 7000 (https://www.thingiverse.com/thing:4653592)Scanned
Deathwalker 8000 (https://www.thingiverse.com/thing:4345952)Scanned
Deathwalker 9000 (https://www.thingiverse.com/thing:4359978)Scanned
Deepwyrm Drow (https://www.thingiverse.com/thing:4379028)Scanned
Dumutef Guard (https://www.thingiverse.com/thing:4345951)Scanned
DŁnd (https://www.thingiverse.com/thing:4346056)Scanned
Dzu-Teh (https://www.thingiverse.com/thing:4595395)Scanned
Earth Elemental (https://www.thingiverse.com/thing:4577484)Scanned
Einar Imperium (https://www.thingiverse.com/thing:4366587)Scanned
Eldgrim the Viking Champion (https://www.thingiverse.com/thing:4359954)Scanned
Elite Onyx Vipers (https://www.thingiverse.com/thing:4595405) (Same Model as Venoc Vipers)Scanned
Eltahale (https://www.thingiverse.com/thing:4359951)Scanned
Emirroon (https://www.thingiverse.com/thing:4341916)Scanned
Empress Kiova (https://www.thingiverse.com/thing:4359939)Scanned
Erevan Sunshadow (https://www.thingiverse.com/thing:4379039)Scanned
Estivara (https://www.thingiverse.com/thing:4359933)Scanned
Evar Scarcarver (https://www.thingiverse.com/thing:4359925)Scanned
Fen Hydra (https://www.thingiverse.com/thing:4595373)Scanned
Feral Troll (https://www.thingiverse.com/thing:4379064)Scanned
Finn the Viking Champion (https://www.thingiverse.com/thing:4343304)Scanned
Fire Elemental (https://www.thingiverse.com/thing:4577502)Scanned
Frost Giant of Morh (https://www.thingiverse.com/thing:4653597)Scanned
Fyorlag Spiders (https://www.thingiverse.com/thing:4595375)Scanned
Gladiatrons (https://www.thingiverse.com/thing:4595408)Scanned
Goblin Cutters (https://www.thingiverse.com/thing:4653565)Scanned
Gorillinators (https://www.thingiverse.com/thing:4653608)Scanned
Granite Guardians (https://www.thingiverse.com/thing:4653556)Scanned
Greater Ice Elemental (https://www.thingiverse.com/thing:4577507)Scanned
Greenscale Warriors (https://www.thingiverse.com/thing:4577510)Scanned
Grimnak (https://www.thingiverse.com/thing:4346088)Scanned
Guilty McCreech (https://www.thingiverse.com/thing:4340876)Scanned
Gurei-Oni (https://www.thingiverse.com/thing:4577477)Scanned
Hatamoto Taro (https://www.thingiverse.com/thing:4577497)Scanned
Heavy Gruts (https://www.thingiverse.com/thing:4379027)Scanned
Heirloom (https://www.thingiverse.com/thing:4359934)Scanned
Horned Skull Brutes (https://www.thingiverse.com/thing:4366576)Scanned
Ice Troll Berserker (https://www.thingiverse.com/thing:4653583)Scanned
Iron Golem (https://www.thingiverse.com/thing:4653596)Scanned
Isamu (https://www.thingiverse.com/thing:4379046)Scanned
Iskra Esenwein (https://www.thingiverse.com/thing:4379045)Scanned
Izumi Samurai (https://www.thingiverse.com/thing:4345946)Scanned
James Murphy (https://www.thingiverse.com/thing:4359919)Scanned
Johnny "Shotgun" Sullivan (https://www.thingiverse.com/thing:4595372)Scanned
Jorhdawn (https://www.thingiverse.com/thing:4653579)Scanned
Jotun (https://www.thingiverse.com/thing:4340928)Scanned
Kaemon Awa (https://www.thingiverse.com/thing:4359957)Scanned
Kato Katsuro (https://www.thingiverse.com/thing:4359943)Scanned
Kee-Mo-Shi (https://www.thingiverse.com/thing:4359935)Scanned
Kelda the Kyrie Warrior (https://www.thingiverse.com/thing:4342998)Scanned
Khosumet the Darklord (https://www.thingiverse.com/thing:4379058)Scanned
Knights of Weston (https://www.thingiverse.com/thing:4359981)Scanned
Kozuke Samurai (https://www.thingiverse.com/thing:4366544)Scanned
Krav Maga Agents (https://www.thingiverse.com/thing:4343312)Scanned
Krug (https://www.thingiverse.com/thing:4379062)Scanned
Kumiko (https://www.thingiverse.com/thing:4653601)Scanned
Kurrok the Elementalist (https://www.thingiverse.com/thing:4359948)Scanned
Kyntela Gwyn (https://www.thingiverse.com/thing:4379050)Scanned
Laglor (https://www.thingiverse.com/thing:4653581)Scanned
MacDirk Warriors (https://www.thingiverse.com/thing:4595389)Scanned
Major Q10 (https://www.thingiverse.com/thing:4359937)Scanned
Major Q9 (https://www.thingiverse.com/thing:4341918)Scanned
Major X17 (https://www.thingiverse.com/thing:4653570)Scanned
Marcu Esenwein (https://www.thingiverse.com/thing:4379048)Scanned
Marcus Decimus Gallus (https://www.thingiverse.com/thing:4359921)Scanned
Marrden Nagrubs (https://www.thingiverse.com/thing:4366542)Scanned
Marro Dividers (https://www.thingiverse.com/thing:4653553)Scanned
Marro Drones (https://www.thingiverse.com/thing:4366551)Scanned
Marro Drudge (https://www.thingiverse.com/thing:4366591)Scanned
Marro Hive (https://www.thingiverse.com/thing:4340875)Scanned
Marro Stingers (https://www.thingiverse.com/thing:4366595)Scanned
Marro Warriors (https://www.thingiverse.com/thing:4342992)Scanned
Master of the Hunt (https://www.thingiverse.com/thing:4595370)Scanned
Master Win Chiu Woo (https://www.thingiverse.com/thing:4595394) (Same Model as Shaolin Monks - 3)Scanned
Me-Burq-Sa (https://www.thingiverse.com/thing:4379038)Scanned
Mezzodemon Warmongers (https://www.thingiverse.com/thing:4366580)Scanned
Migol Ironwill (https://www.thingiverse.com/thing:4595386)Scanned
Mika Connour (https://www.thingiverse.com/thing:4359941)Scanned
Mimring (https://www.thingiverse.com/thing:4345987)Scanned
Mind Flayer Mastermind (https://www.thingiverse.com/thing:4595371)Scanned
Minions of Utgar (https://www.thingiverse.com/thing:4351491)Scanned
Mogrimm Forgehammer (https://www.thingiverse.com/thing:4340872)Scanned
Mohican River Tribe (https://www.thingiverse.com/thing:4595377)Scanned
Moltenclaw (https://www.thingiverse.com/thing:4595369)Scanned
Moriko (https://www.thingiverse.com/thing:4354006)Scanned
Morsbane (https://www.thingiverse.com/thing:4653568)Scanned
Nakita Agents (https://www.thingiverse.com/thing:4356898)Scanned
Ne-Gok-Sa (https://www.thingiverse.com/thing:4342993)Scanned
Nerak the Glacian Swog Rider (https://www.thingiverse.com/thing:4359928) (Same Model as Swog Rider)Scanned
Nilfheim (https://www.thingiverse.com/thing:4340870)Scanned
Ninjas of the Northern Wind (https://www.thingiverse.com/thing:4356885)Scanned
Obsidian Guards (https://www.thingiverse.com/thing:4653556)(Same Model as Granite Guardians)Scanned
Ogre Pulverizer (https://www.thingiverse.com/thing:4350869)Scanned
Ogre Warhulk (https://www.thingiverse.com/thing:4653598)Scanned
Omnicron Repulsors (https://www.thingiverse.com/thing:4595406)Scanned
Omnicron Snipers (https://www.thingiverse.com/thing:4577470)Scanned
Ornak (https://www.thingiverse.com/thing:4379063)Scanned
Othkurik the Black Dragon (https://www.thingiverse.com/thing:4379059)Scanned
Otonashi (https://www.thingiverse.com/thing:4353999)Scanned
Pelloth (https://www.thingiverse.com/thing:4379057)Scanned
Phantom Knights (https://www.thingiverse.com/thing:4577476)Scanned
Protectors of Ullar (https://www.thingiverse.com/thing:4577471)Scanned
Quasatch Hunters (https://www.thingiverse.com/thing:4595395) (Same Model as Dzu-The)Scanned
Raelin the Kyrie Warrior (https://www.thingiverse.com/thing:4342996)Scanned
Rechets of Bogdan (https://www.thingiverse.com/thing:4379032)Scanned
Red Wyrmling (https://www.thingiverse.com/thing:4577493)Scanned
Retiarius (https://www.thingiverse.com/thing:4354014)Scanned
Rhogar Dragonspine (https://www.thingiverse.com/thing:4354001)Scanned
Roman Archers (https://www.thingiverse.com/thing:4341922)Scanned
Roman Legionnaires (https://www.thingiverse.com/thing:4340868)Scanned
Runa (https://www.thingiverse.com/thing:4354003)Scanned
Sahuagin Raider (https://www.thingiverse.com/thing:4577496)Scanned
Samuel Brown (https://www.thingiverse.com/thing:4577474) (Same Model as 4th Massachusetts Line - 3)Scanned
Saylind the Kyrie Warrior (https://www.thingiverse.com/thing:4577486)Scanned
Sentinels of Jandar (https://www.thingiverse.com/thing:4653604)Scanned
Sgt. Drake Alexander (https://www.thingiverse.com/thing:4345956)Scanned
Sgt. Drake Alexander (SotM) (https://www.thingiverse.com/thing:4354007)Scanned
Shades of Bleakewoode (https://www.thingiverse.com/thing:4379036)Scanned
Shaolin Monks (https://www.thingiverse.com/thing:4595394)Scanned
Sharwin Wildborn (https://www.thingiverse.com/thing:4359940)Scanned
Shiori (https://www.thingiverse.com/thing:4359956)Scanned
Shurrak (https://www.thingiverse.com/thing:4353992)Scanned
Siege (https://www.thingiverse.com/thing:4354009)Scanned
Sir Denrick (https://www.thingiverse.com/thing:4653572)Scanned
Sir Dupuis (https://www.thingiverse.com/thing:4351370)Scanned
Sir Gilbert (https://www.thingiverse.com/thing:4577479)Scanned
Sir Hawthorne (https://www.thingiverse.com/thing:4359981) (Same Model as Knights of Weston - 2)Scanned
Sonlen (https://www.thingiverse.com/thing:4653585)Scanned
Sonya Esenwein (https://www.thingiverse.com/thing:4379044)Scanned
Spartacus (https://www.thingiverse.com/thing:4354015)Scanned
Su-Bak-Na (https://www.thingiverse.com/thing:4345963)Scanned
Sudema (https://www.thingiverse.com/thing:4577480)Scanned
Sujoah (https://www.thingiverse.com/thing:4595365)Scanned
Swog Rider (https://www.thingiverse.com/thing:4359928)Scanned
Syvarris (https://www.thingiverse.com/thing:4343000)Scanned
Taelord the Kyrie Warrior (https://www.thingiverse.com/thing:4341676)Scanned
Tagawa Samurai (https://www.thingiverse.com/thing:4356889)Scanned
Tagawa Samurai Archers (https://www.thingiverse.com/thing:4356896)Scanned
Tandros Kreel (https://www.thingiverse.com/thing:4379055)Scanned
Tarn Viking Warriors (https://www.thingiverse.com/thing:4345947)Scanned
Templar Cavalry (https://www.thingiverse.com/thing:4351371)Scanned
Theracus (https://www.thingiverse.com/thing:4340865)Scanned
Thorgrim the Viking Champion (https://www.thingiverse.com/thing:4343307)Scanned
Torin (https://www.thingiverse.com/thing:4353994)Scanned
Tor-Kul-Na (https://www.thingiverse.com/thing:4345958)Scanned
Tornak (https://www.thingiverse.com/thing:4379066)Scanned
Tul-Bak-Ra (https://www.thingiverse.com/thing:4577482)Scanned
Ulginesh (https://www.thingiverse.com/thing:4340863)Scanned
Valguard (https://www.thingiverse.com/thing:4653590)Scanned
Venoc Vipers (https://www.thingiverse.com/thing:4595405)Scanned
Venoc Warlord (https://www.thingiverse.com/thing:4353996)Scanned
Warden 816 (https://www.thingiverse.com/thing:4379056)Scanned
Warforged Soldiers (https://www.thingiverse.com/thing:4356893)Scanned
Warriors of Ashra (https://www.thingiverse.com/thing:4340862)Scanned
Water Elemental (https://www.thingiverse.com/thing:4577504)Scanned
Werewolf Lord (https://www.thingiverse.com/thing:4653595)Scanned
White Wyrmling (https://www.thingiverse.com/thing:4577491)Scanned
Wolves of Badru (https://www.thingiverse.com/thing:4653558)Scanned
Wo-Sa-Ga (https://www.thingiverse.com/thing:4577467)Scanned
Wyvern (https://www.thingiverse.com/thing:4595367)Scanned
Zelrig (https://www.thingiverse.com/thing:4568079)Scanned
Zetacron (https://www.thingiverse.com/thing:4578062)Scanned
Zettian Guards (https://www.thingiverse.com/thing:4343310)Scanned
Zombies of Morindan (https://www.thingiverse.com/thing:4379025)Scanned


To Be Scanned
Drow Chainfighter
Grok Riders
Marrden Hounds
Microcorp Agents
Parmenio
Raelin the Kyrie Warrior (SotM)
Sacred Band


Terrain
Tree 1 (https://www.thingiverse.com/thing:4350082)Scanned
Tree 2 (https://www.thingiverse.com/thing:4350089)Scanned
Tree 3 (https://www.thingiverse.com/thing:4350155)Scanned
Tree 4 (https://www.thingiverse.com/thing:4350112)Scanned
Ruin Small (https://www.thingiverse.com/thing:4350654)Scanned
Ruin Large (https://www.thingiverse.com/thing:4350656)Scanned

White Knight
May 7th, 2020, 12:42 AM
Seriously, your scans are unbelievable! I almost don't want to finish mine anymore. I just want to gaze at your scans with jealousy...

Haha, great job!

Tornado
May 7th, 2020, 07:45 AM
Awesome. What scanner do you have?

scapedood
May 7th, 2020, 09:01 AM
Awesome. What scanner do you have?
einscan-se

scapedood
May 7th, 2020, 03:01 PM
By the way, for any figures that I have a source for that I haven't scanned yet, If you want it prioritized just let me know and I'll try to prioritize that.

scapedood
May 8th, 2020, 03:24 AM
Whew boy.
Long day, but managed to get the rest of my figures scanned and fixed up; list above updated with all the new pieces.
Now gotta wait for my sources to get there stuff together for me to pick up.

White Knight
May 8th, 2020, 09:49 AM
Whew boy.
Long day, but managed to get the rest of my figures scanned and fixed up; list above updated with all the new pieces.
Now gotta wait for my sources to get there stuff together for me to pick up.:excited:
You must spread some Reputation around before giving it to scapedood again.

TREX
May 8th, 2020, 09:55 AM
The scans are great. Thanks for posting them. I look forward to seeing your progress.

robbdaman
May 8th, 2020, 12:45 PM
I think the biggest thing that people want scanned is Zelrig but it may be up to someone to be willing to send you one to do so. Maybe if someone local to the PA Heroscape scene is able to deliver it for scanning sometime that may be the least risk. As for myself I wouldn't mind a good quality Ogre Pulverizer.

Guillermo-Tell
May 9th, 2020, 09:19 AM
Wow, awesome work man.

May I request something a bit off topic? Could you scan some terrrain parts as well? More specifically the Fortress of the Archkyrie set and the main set ruins. It'd be amazing to make huge buildings with an extended supply of those parts.

Thank you!

White Knight
May 9th, 2020, 09:59 AM
Wow, awesome work man.

May I request something a bit off topic? Could you scan some terrrain parts as well? More specifically the Fortress of the Archkyrie set and the main set ruins. It'd be amazing to make huge buildings with an extended supply of those parts.

Thank you!
I have the Fortress Walls 90% modeled--I just need to add the textures. The problem I've been having is getting the tabs to fit snug but not break. This is especially true because the 3D print plastics are different strengths and flexibilities than the injection molded plastics.

I don't think a scan will be any better.

I will try to work on my walls and post them this week.

scapedood
May 9th, 2020, 10:28 AM
Wow, awesome work man.

May I request something a bit off topic? Could you scan some terrrain parts as well? More specifically the Fortress of the Archkyrie set and the main set ruins. It'd be amazing to make huge buildings with an extended supply of those parts.

Thank you!
I have the Fortress Walls 90% modeled--I just need to add the textures. The problem I've been having is getting the tabs to fit snug but not break. This is especially true because the 3D print plastics are different strengths and flexibilities than the injection molded plastics.

I don't think a scan will be any better.

I will try to work on my walls and post them this week.

Yeah, I agree. the interlocking pieces are the reason I've stayed away from terrain at this point. But, I can always scan the trees, they shouldn't be a big deal.

White Knight
May 9th, 2020, 10:32 AM
Wow, awesome work man.

May I request something a bit off topic? Could you scan some terrrain parts as well? More specifically the Fortress of the Archkyrie set and the main set ruins. It'd be amazing to make huge buildings with an extended supply of those parts.

Thank you!
I have the Fortress Walls 90% modeled--I just need to add the textures. The problem I've been having is getting the tabs to fit snug but not break. This is especially true because the 3D print plastics are different strengths and flexibilities than the injection molded plastics.

I don't think a scan will be any better.

I will try to work on my walls and post them this week.

Yeah, I agree. the interlocking pieces are the reason I've stayed away from terrain at this point. But, I can always scan the trees, they shouldn't be a big deal.The ruins should work as well. I know some people want to 3D print reversed ruins to make buildings.

robbdaman
May 9th, 2020, 02:24 PM
I've found very few interlocking pieces that work the way the original terrain does thus far. I've tinkered a lot though so have some okay pieces. Stuff that sits on top like trees and ruins and such though are a good choice since they don't have to be so perfect.

scapedood
May 9th, 2020, 02:37 PM
Added Trees, scanning ruins now.

Had to fix the bases of the small trees, pain :/

scapedood
May 9th, 2020, 05:48 PM
Ruins loaded. Got some of the figures from one of my friends, will be uploading a good bit more.

As for myself I wouldn't mind a good quality Ogre Pulverizer. Scanning this now, should be loaded on thingiverse within the hour.

scapedood
May 10th, 2020, 12:38 AM
New Figures Scanned:

Minions of Utgar
Ogre Pulverizer
Sir Dupuis
Templar Cavalry

The Cavalry did not have lances...I did my best to model some, but if someone wants to update the lances, go for it; I'd credit you.

White Knight
May 10th, 2020, 12:54 PM
New Figures Scanned:

Minions of Utgar
Ogre Pulverizer
Sir Dupuis
Templar Cavalry

The Cavalry did not have lances...I did my best to model some, but if someone wants to update the lances, go for it; I'd credit you.
Well, I worked on smoothing my model of the Ogre Pulverizer last night...

I'll still post my version, but I'm sure your version is so much better.

Great job again Scapedood.

robbdaman
May 10th, 2020, 03:00 PM
Thanks for this Scapedood! White Knight I'm sure everyone appreciates your work even if you feel it's not as good as the scans he can produce. The game continues to thrive because of your hard work.

scapedood
May 10th, 2020, 03:23 PM
Thanks for this Scapedood! White Knight I'm sure everyone appreciates your work even if you feel it's not as good as the scans he can produce. The game continues to thrive because of your hard work.

Agreed, I wouldn't have bought the scanner if I wasn't first inspired by his hard work.

scapedood
May 10th, 2020, 07:20 PM
New Figures Scanned:

Moriko
Otonashi
Retiarius
Rhogar Dragonspine
Runa
Sgt. Drake Alexander (SotM)
Shurrak
Siege
Spartacus
Torin
Venoc Warlord

Guillermo-Tell
May 11th, 2020, 08:45 AM
Thanks for the ruins Scapedood! They're amazing!

As for White Knight, what else can I say? As everyone said, you're the leader of this game rebuild. Thank you too!

TyScaper
May 11th, 2020, 12:18 PM
Thank you so much for doing this!
I got into Heroscape when I found the master sets on clearance. By the time I realized how incredible the game was, I wasnít able to find anything else.
Thank you for helping Heroscape live on.

scapedood
May 11th, 2020, 08:13 PM
New Figures Scanned:

Nakita Agents
Ninjas of the Northern Wind
Tagawa Samurai
Tagawa Samurai Archers
Warforged Soldiers

Also, received second bundle from one of my sources, more scans coming tomorrow, though my 4 day weekend is ending :( so it will probably be slower.

scapedood
May 11th, 2020, 09:07 PM
Just finished taking inventory of all the new pieces I received for scanning, there are a lot.

I updated the first page to show what's coming next, If you want any of those rushed, let me know and I'll do them first.

superfrog
May 12th, 2020, 01:16 PM
Hi scapedood, looking good.

I only see two warforged soldiers. Do you have the third one scanned?

scapedood
May 12th, 2020, 02:09 PM
Hi scapedood, looking good.

I only see two warforged soldiers. Do you have the third one scanned?

Hmm, don't know why it didn't show up.

Just edited it to add the file, might not show up right away.

scapedood
May 12th, 2020, 11:54 PM
New Figures Scanned:

Crixus
Deathwalker 9000
Eldgrim the Viking Champion
Eltahale
Empress Kiova
Estivara
Evar Scarcarver
Heirloom
James Murphy
Kaemon Awa
Kato Katsuro
Kee-Mo-Shi
Knights of Weston
Kurrok the Elementalist
Major Q10
Marcus Decimus Gallus
Mika Connour
Sharwin Wildborn
Shiori
Swog Rider

superfrog
May 13th, 2020, 12:04 AM
This is incredible.

A little request: for figures that are repaints/use the same sculpts, could you post the file for both units?

For example:

You have Knights of Weston, so you also have Sir Hawthorne.
You have Swog Rider, so you also have Nerak.
You have Nakita Agents, so you also have Agent Skahen.

There's also Venoc Vipers/Elite Onyx Vipers, Obsidian Guards/Granite Guardians, Dzu-Teh/Quasatch Hunters, Shaolin Monks/Master Win Chiu Woo, and 4th Mass/Samuel Brown.

scapedood
May 13th, 2020, 12:08 AM
This is incredible.

A little request: for figures that are repaints/use the same sculpts, could you post the file for both units?

For example:

You have Knights of Weston, so you also have Sir Hawthorne.
You have Swog Rider, so you also have Nerak.
You have Nakita Agents, so you also have Agent Skahen.

There's also Venoc Vipers/Elite Onyx Vipers, Obsidian Guards/Granite Guardians, Dzu-Teh/Quasatch Hunters, Shaolin Monks/Master Win Chiu Woo, and 4th Mass/Samuel Brown.

Interesting, Didn't know that all these figures had reprints, only one I knew about was Samuel Brown. I'll just post the link and specify which model is shared, no sense uploading the same thing twice.

superfrog
May 13th, 2020, 12:12 AM
Right, just double linking should be fine. Just makes this index a bit easier to use, and makes less scans for you to do :)

scapedood
May 13th, 2020, 12:21 AM
Right, just double linking should be fine. Just makes this index a bit easier to use, and makes less scans for you to do :)

True, after the past couple of days, less scans sounds nice.

Anywho, updated the page with the repaint figures listed...you may have to remind me when I get to the others! lol.

Guillermo-Tell
May 13th, 2020, 09:14 AM
Hi guys,

I've noticed some figures have specific symbols that are nearly impossible to replicate by hand painting. For example, the pattern on Knights of Weston shields. I was wondering if there's a way to make them with decals or something similar, but that requires a digital copy of the symbol to be printed. Do you think they can be scanned somehow, or just simply taking pictures of them?

BTW, am I the only one who gets a non-manifold warning with the small ruin in Cura 4.6.1?

Thanks.

scapedood
May 13th, 2020, 09:36 AM
Hi guys,

I've noticed some figures have specific symbols that are nearly impossible to replicate by hand painting. For example, the pattern on Knights of Weston shields. I was wondering if there's a way to make them with decals or something similar, but that requires a digital copy of the symbol to be printed. Do you think they can be scanned somehow, or just simply taking pictures of them?

BTW, am I the only one who gets a non-manifold warning with the small ruin in Cura 4.6.1?

Thanks.

Yeah, best bet is to print a sticker. Someone should totally make images for people to print...

robbdaman
May 13th, 2020, 09:59 AM
Fairly certain there are KoW emblems someone around here. White Knight might remember, I know I've printed up some decals of them in the past.

White Knight
May 13th, 2020, 10:16 AM
These might need to be scaled correctly (I think they are too big), so I will give both the pdf file and the powerpoint file:

heroscape bases and stickers pdf (https://drive.google.com/open?id=141CH52OsvPC25Z69BwCwsLgo73YTOqDA)
heroscape bases and stickers ppt (https://drive.google.com/open?id=1T0KTuk1X_UwDep_6Q2HBdCqkcqNrsDLm)

I have some updates to this file that I will need to add eventually (correcting the small peanut shape, adding stickers for small and large D&D singles).

scapedood
May 13th, 2020, 11:36 AM
These might need to be scaled correctly (I think they are too big), so I will give both the pdf file and the powerpoint file:

heroscape bases and stickers pdf (https://drive.google.com/open?id=141CH52OsvPC25Z69BwCwsLgo73YTOqDA)
heroscape bases and stickers ppt (https://drive.google.com/open?id=1T0KTuk1X_UwDep_6Q2HBdCqkcqNrsDLm)

I have some updates to this file that I will need to add eventually (correcting the small peanut shape, adding stickers for small and large D&D singles).

Nice!

scapedood
May 15th, 2020, 06:41 PM
New Figures Scanned:

Arrow Gruts
Blade Gruts
Death Chasers of Thesk
Einar Imperium
Horned Skull Brutes
Kozuke Samurai
Marrden Nagrubs
Marro Drones
Marro Drudge
Marro Stingers
Mezzodemon Warmongers

Note. the Mezzodemon trident was broken off on my sources figure. I had to reconstruct; I'm not a 3D artist but it's better than nothing...

TREX
May 17th, 2020, 04:58 PM
I finished downloading all your files so far last night. Great work on this. IAmBatman, or any other Admin, can we get this resource stickied. This is a real contribution. Thanks again for your efforts scapedood. I can't rep you again yet or I would.

scapedood
May 17th, 2020, 07:52 PM
I finished downloading all your files so far last night. Great work on this. IAmBatman, or any other Admin, can we get this resource stickied. This is a real contribution. Thanks again for your efforts scapedood. I can't rep you again yet or I would.

<3

I have more coming, should finish scanning tmw night, might finish upload then too. Running out of sources, if anyone wants to contribute, hmu.

Just finished painting three squads of printed Marro Drones. Super happy with how they turned out! Here is a pic next to actual Marro Drones
https://i.imgur.com/CviCiQ8.jpg

TREX
May 17th, 2020, 09:10 PM
They look fantastic scapedood. They look darn almost identical. From what I can tell the spear handles need a dark silver on the ones you painted to make them match along with the base color. Only minor quibbles though. When I get to them on my printing que, I'm going to do some crazy paint jobs with some different color schemes. Maybe not with the marro though. Those look good in their bony scheme.

White Knight
May 17th, 2020, 09:41 PM
I still can't rep scapedood, but he deserves it!
:excited:

scapedood
May 20th, 2020, 02:19 AM
New Figures Scanned:
Ana Karithon
Cyprien Esenwein
Darrak Ambershard
Deepwyrm Drow
Erevan Sunshadow
Feral Troll
Heavy Gruts
Isamu
Iskra Esenwein
Khosumet the Darklord
Krug
Kyntela Gwyn
Marcu Esenwein
Me-Burq-Sa
Ornak
Othkurik the Black Dragon
Pelloth
Rechets of Bogdan
Shades of Bleakwoode
Sonya Esenwein
Tandros Kreel
Tornak
Warden 816
Zombies of Morindan


Only have one more source for figures; they only have about 5 cards coming from that source. So anyone willing to help the cause, hmu.

TREX
May 20th, 2020, 11:44 AM
Great work scapedood.

White Knight
May 20th, 2020, 12:42 PM
I still can't rep @scapedood (https://www.heroscapers.com/community/member.php?u=74668) , but he deserves it!
:excited:
I'm just going to have to keep reposting this!

Soon my scans will be obsolete, which is good news since I was never 100% happy with how they came out.


Thanks scapedood

scapedood
May 20th, 2020, 01:15 PM
I still can't rep @scapedood (https://www.heroscapers.com/community/member.php?u=74668) , but he deserves it!
:excited:
I'm just going to have to keep reposting this!

Soon my scans will be obsolete, which is good news since I was never 100% happy with how they came out.


Thanks scapedood

I think your stuff came out amazing for the fact that you were using photogrammetry.

White Knight
May 20th, 2020, 01:56 PM
I still can't rep @scapedood (https://www.heroscapers.com/community/member.php?u=74668) , but he deserves it!
:excited:
I'm just going to have to keep reposting this!

Soon my scans will be obsolete, which is good news since I was never 100% happy with how they came out.


Thanks scapedood

I think your stuff came out amazing for the fact that you were using photogrammetry.Oh I agree. And my models might be good enough for my FDM Ender 3 printer--better resolution might not help.


Your scans:
- render much quicker (my computer takes 12 hours to create a 3d model)
- have better detail
- don't require half an hour or more of post-processing cleanup

I'm so happy you are doing this.

SharkRider1
May 20th, 2020, 04:26 PM
I'll agree. White Knight what you've done has been fantastic. Both of these projects are amazing and it's so cool to know the game survives in this form! I've gotta figure out a way to get some of these printed at some point... Cheers to both of you!

capsocrates
May 26th, 2020, 04:25 PM
I'm itching to see models for the dungeon + ice outcrops. The dungeons are just reprints of a subset of the ice ones. I bought an incomplete Tundra set a while back; would be nice to have a way to make it complete.

White Knight
May 26th, 2020, 07:23 PM
I'm itching to see models for the dungeon + ice outcrops. The dungeons are just reprints of a subset of the ice ones. I bought an incomplete Tundra set a while back; would be nice to have a way to make it complete.


There are good models of the glaciers/rock outcrops here:


3D Models Terrain (https://www.heroscapers.com/community/showthread.php?t=52903)


http://www.mediafire.com/convkey/9497/q7sjcue9niv0sjrzg.jpg

http://www.mediafire.com/convkey/739c/df7k4t0bej8vhkpzg.jpg

Piratebunny
May 26th, 2020, 07:44 PM
Wow, awesome work man.

May I request something a bit off topic? Could you scan some terrrain parts as well? More specifically the Fortress of the Archkyrie set and the main set ruins. It'd be amazing to make huge buildings with an extended supply of those parts.

Thank you!

It would be awesome to make a Corprate skyscraper or something to that affect to use with some of the Corprate/agent style army figures.

Alexandros
May 29th, 2020, 04:27 PM
Yo Scapedood, superfrog just informed me I live less than an hour from you and it looks like I have a number of units you don't have, in addition to a fair amount of C3V stuff. If you'd like to meet up or something I'd be happy to come your way with my collection. PM me.

scapedood
May 29th, 2020, 06:05 PM
Yo Scapedood, superfrog just informed me I live less than an hour from you and it looks like I have a number of units you don't have, in addition to a fair amount of C3V stuff. If you'd like to meet up or something I'd be happy to come your way with my collection. PM me.

Heck yeah!

Just PM me a list of stuff that you have from the list and week can work something out.

White Knight
May 29th, 2020, 06:10 PM
Wow, awesome work man.

May I request something a bit off topic? Could you scan some terrrain parts as well? More specifically the Fortress of the Archkyrie set and the main set ruins. It'd be amazing to make huge buildings with an extended supply of those parts.

Thank you!

It would be awesome to make a Corprate skyscraper or something to that affect to use with some of the Corprate/agent style army figures.See this thread (https://www.heroscapers.com/community/showpost.php?p=2387754&postcount=341)


http://www.mediafire.com/convkey/83c9/682ojfnry9s4wugzg.jpg

Alexandros
May 29th, 2020, 06:57 PM
Yo Scapedood, superfrog just informed me I live less than an hour from you and it looks like I have a number of units you don't have, in addition to a fair amount of C3V stuff. If you'd like to meet up or something I'd be happy to come your way with my collection. PM me.

Heck yeah!

Just PM me a list of stuff that you have from the list and week can work something out.

Just OG or C3V also?

boromir96
May 29th, 2020, 07:07 PM
Yo Scapedood, superfrog just informed me I live less than an hour from you and it looks like I have a number of units you don't have, in addition to a fair amount of C3V stuff. If you'd like to meet up or something I'd be happy to come your way with my collection. PM me.

Heck yeah!

Just PM me a list of stuff that you have from the list and week can work something out.

Just OG or C3V also?

I canít speak for everyone but I know Iím way more interested in the C3V ones. Especially the Confrontation miniatures are ridiculously expensive now.

Drewman-chu
May 29th, 2020, 07:37 PM
Really cool stuff here! I wish I knew more about 3d printing. I will have to learn soon.

scapedood
May 29th, 2020, 08:05 PM
Yo Scapedood, superfrog just informed me I live less than an hour from you and it looks like I have a number of units you don't have, in addition to a fair amount of C3V stuff. If you'd like to meet up or something I'd be happy to come your way with my collection. PM me.

Heck yeah!

Just PM me a list of stuff that you have from the list and week can work something out.

Just OG or C3V also?

I canít speak for everyone but I know Iím way more interested in the C3V ones. Especially the Confrontation miniatures are ridiculously expensive now.

I'm prioritizing classic heroscape, but If people have stuff and are willing to let me scan it, i'm not going to turn it away.

jcustar07
June 3rd, 2020, 01:28 AM
this is great!

Black Hawk
June 11th, 2020, 09:12 PM
Wow! Amazing scans! It would be great if you have the chance to upload some scans from wave 9. Getting multiples of squads in wave 9 is so hard ourdays. Best regards and keep the good work up!

White Knight
June 11th, 2020, 09:33 PM
Wow! Amazing scans! It would be great if you have the chance to upload some scans from wave 9. Getting multiples of squads in wave 9 is so hard ourdays. Best regards and keep the good work up!
Wave 9 is here (https://www.heroscapers.com/community/showthread.php?t=54977).


The scans are not quite as good as these, but they are still good.

scapedood
June 11th, 2020, 10:26 PM
Wow! Amazing scans! It would be great if you have the chance to upload some scans from wave 9. Getting multiples of squads in wave 9 is so hard ourdays. Best regards and keep the good work up!

I've scanned all of mine and only have 5 figures left from people I know.

Anyone who is willing to send me some of their figures to scan can PM me. I would also love some wave 9 figures :)

Guillermo-Tell
June 17th, 2020, 11:06 AM
Hi guys,
after many weeks, my Ender 3 is working again (it took a while to get a heater replacement thanks to the virus).

I tried one of Scapedood's figure, Ana Karithon, and here are the results:

https://lh3.googleusercontent.com/pw/ACtC-3cDmWUwCiH4ly4eaxE_sG9X8fwalR38AWj1PpvFdAeJod0lq4sonc4JNylOoZj8r7kLIz0 NUOHWoQ8YvLFu-0AdOfyDFEl9X8fpLvXZI00N2YG1HIUZZHqB4JoO6oFKc5-TQpEvACwTlVLPMDKQJ4Cy=w876-h657-no?authuser=0

I used WK's profile with supports and eSun PLA+.

The quality is amazing, you can even notice the face details, but I still get lots of stringing issues. No idea how to fix it, I've tried tuning everything on the machine side, my bet is it's caused by moisture in the filament. Has anyone ever experienced this thing?

Thanks.

robbdaman
June 17th, 2020, 11:55 AM
The quality is amazing, you can even notice the face details, but I still get lots of stringing issues. No idea how to fix it, I've tried tuning everything on the machine side, my bet is it's caused by moisture in the filament. Has anyone ever experienced this thing?

Thanks.

Some stringiness is expected due to speed however you can use retraction to curb that in. It takes a good bit to hone in on all the causes. If you Google 3d printing stringing you'll get a bazillion hits on what to fix. Try watching some of the videos and hopefully they can help.

White Knight
June 17th, 2020, 04:51 PM
Hi guys,
after many weeks, my Ender 3 is working again (it took a while to get a heater replacement thanks to the virus).

I tried one of Scapedood's figure, Ana Karithon, and here are the results:

https://lh3.googleusercontent.com/pw/ACtC-3cDmWUwCiH4ly4eaxE_sG9X8fwalR38AWj1PpvFdAeJod0lq4sonc4JNylOoZj8r7kLIz0 NUOHWoQ8YvLFu-0AdOfyDFEl9X8fpLvXZI00N2YG1HIUZZHqB4JoO6oFKc5-TQpEvACwTlVLPMDKQJ4Cy=w876-h657-no?authuser=0

I used WK's profile with supports and eSun PLA+.

The quality is amazing, you can even notice the face details, but I still get lots of stringing issues. No idea how to fix it, I've tried tuning everything on the machine side, my bet is it's caused by moisture in the filament. Has anyone ever experienced this thing?

Thanks.Amazon has been out of gray PLA+, so I've been using white as well.

With the white PLA+, I noticed I have to run a little cooler nozzle temperatures. I've been printing at 190C and getting better results. (change all 4 printing temperature boxes to 190C).

But besides the stringing it looks great!

Guillermo-Tell
June 18th, 2020, 02:45 PM
I tried again with WK's advice, here are the results of Arkmer:

Before cleaning:

https://lh3.googleusercontent.com/pw/ACtC-3doaZkOdLfifnZDnQkqssmy4eymRSvoVFSYgv4_3xYwix9Gt_4Aj5Kni3CeRnowGstYjeM ZvU7jEJ7-ge0IPYODoyiLXWmn-OLzlzfGbJ2MLarkFTjJ-HnqSEgnv1ThlaGYpSHAD5S4Cl8WGA_UD0V2=w876-h657-no?authuser=0

https://lh3.googleusercontent.com/pw/ACtC-3enn0qHCzLcAxE_DyIlRgUTjYiAxPKeS4BpnbwftZ5bFtqRVlJNi-Nd-LuSHp1lNeYdlmGjcmmaSYpFrECNctZLsnXglKRMTWLsfCPmahBK9nF-pkZJX1R0ZCjpLzEXb0oqnNk2bePFp_4uAhtgeSF5=w876-h657-no?authuser=0

After cleaning:

https://lh3.googleusercontent.com/pw/ACtC-3dPUhahnwq777LF5v5Rh_D1iECZ1_XkdHDXPmmmfAW57KT0292ugSDnmASJ5edsCaLm7WU VDqpKJugWZJ-BdFS5e2QKt1C_IaiPM5jD9H-9hrD7gpkYdPzASZmHAZDbhdlivRsAr50_p2C2UZ_sx1pX=w876-h657-no?authuser=0

https://lh3.googleusercontent.com/pw/ACtC-3dT-V-R82fNYXyoKdr64K3guQnbH67yTtPebXp3eDaZUcbCbc2HZ8FsM63PsoC6ADS51yAuNkO7x Yr0rQW5zT7HIwcWLPpIybUuI4x3nzdzkPE7x4w4tveIR2tVXbmQFS0KyIh0R_axrdf6C5e ef0sU=w876-h657-no?authuser=0

There's a noticeable improvement in quality. Especially at the hood and cloak. It still has some issues though.

Unfortunately, the staff was a mess and broke during cleaning so I had to glue it in place again.

Looks like the hood turned out better than the rest because of the slower print speed, as Robbdaman said. Maybe I've to tune the retraction settings a bit more.

Thanks.

White Knight
June 18th, 2020, 04:03 PM
Unfortunately, the staff was a mess and broke during cleaning so I had to glue it in place again.
I use a hot tool (wood burning tool/soldering iron) to hot weld things back together and smooth them over.

You might want to increase the temperature to 200C to see if it looks smoother. Because the layers of the hood take less time to print, the time between layers is less and the layers would not have cooled down as much as the cloak or body. So the rough layers could be because the filament was too cold while printing.

scapedood
June 18th, 2020, 10:57 PM
Just got around to painting some stingers that I printed a while back...

https://i.imgur.com/pg6Vejo.jpg

Anyone who would be able to contribute to the project with some of the missing figures to scan, it would be greatly appreciated! (I would just scan them and send them back)

superfrog
June 18th, 2020, 11:14 PM
Wow!

Maybe coachmuskie could help you out? I know he’s got a bunch of those figures and he’s into 3D printing too :)

Son of Arathorn
June 19th, 2020, 12:07 AM
Holy smokes... wow.

Leaf_It
June 19th, 2020, 12:38 AM
Hello. I have a complete collection of everything ever released for Heroscape. Lets get this resource completed.

Send me a message so we can get the logistics figured out, and get you every figure you need.

White Knight
June 19th, 2020, 02:38 AM
Just got around to painting some stingers that I printed a while back...

https://i.imgur.com/pg6Vejo.jpg

Anyone who would be able to contribute to the project with some of the missing figures to scan, it would be greatly appreciated! (I would just scan them and send them back)
:jawdrop:

scapedood
June 19th, 2020, 09:26 AM
Hello. I have a complete collection of everything ever released for Heroscape. Lets get this resource completed.

Send me a message so we can get the logistics figured out, and get you every figure you need.

:woot:

PMing you now!

Leaf_It
June 19th, 2020, 12:57 PM
I didn't realize this got stickied, and spent way too long trying to find the thread.

TREX
June 19th, 2020, 02:45 PM
I didn't realize this got stickied, and spent way too long trying to find the thread.

I requested it to be stickied a little while back. Thats awesome of you to help out man. It will help a lot of scapers. Thanks.

White Knight
June 20th, 2020, 02:47 AM
scapedood,

Since your scans are better and faster, I'm thinking of sending you a bunch of Lord of the Rings figures to scan. Would you have time for that?

TREX
June 20th, 2020, 05:29 AM
scapedood,

Since your scans are better and faster, I'm thinking of sending you a bunch of Lord of the Rings figures to scan. Would you have time for that?
I was thinking something similar but wasnt as sure on if it would be a good idea IP wise. Rare and out of print figures would be great for this type of thing though.

scapedood
June 20th, 2020, 10:26 AM
scapedood,

Since your scans are better and faster, I'm thinking of sending you a bunch of Lord of the Rings figures to scan. Would you have time for that?

I'd be happy to scan any figures people would want to send me, but any figures sent would take a back seat in queue to the heroscape figures i'll be scanning soon.

Though, one big thing I discussed with Leaf_it is the scanning process.

The scanner I use uses light reflection in order to scan the figure. very dark parts that absorb a lot of light, super reflective parts that reflect too much light, and transparent parts that let the light pass through them don't work with the scanner. To counteract this, I've used developer chalk in order to give the figures a flat matte surface on the figures I've scanned.

The chalk comes off easily, and I would clean any figures that I would have to spray.

Here is a before and after cleaning of one of the figures I've scanned with the chalk. (The brown areas wouldn't show up on the scan if i didn't use the chalk)

before cleaning
https://i.imgur.com/bxaebCy.jpg

after cleaning
https://i.imgur.com/7tVmrJ9.jpg

I haven't had any issues using it with of the heroscape figures i've scanned, but who knows.

Also, I would want to be reimbursed for the return shipping for any non-heroscape figures people would want scanned.

White Knight
June 20th, 2020, 11:12 AM
I'd be happy to scan any figures people would want to send me, but any figures sent would take a back seat in queue to the heroscape figures i'll be scanning soon.

Though, one big thing I discussed with Leaf_it is the scanning process.

The scanner I use uses light reflection in order to scan the figure. very dark parts that absorb a lot of light, super reflective parts that reflect too much light, and transparent parts that let the light pass through them don't work with the scanner. To counteract this, I've used developer chalk in order to give the figures a flat matte surface on the figures I've scanned.

The chalk comes off easily, and I would clean any figures that I would have to spray.



Also, I would want to be reimbursed for the return shipping for any non-heroscape figures people would want scanned.
Yes, of course I'd pay for shipping both ways. And chalk is fine. I usually spray figures with dulling spray before scanning (which supposedly evaporates eventually), but the chalk is probably better.

I'll hold of while you work on the classic stuff. We're not in a hurry.

Alexandros
July 8th, 2020, 12:13 PM
Hi ScapeDood,

I reached out to you previously about helping you with scans as I live about an hour away. I had not responded because I was working on a deal. Long story short, I am now $2000 poorer and one complete collection of HeroScape richer.

Would you still like me to come through with whatever figures you're missing or have you figured out another solution?

scapedood
July 8th, 2020, 04:39 PM
Hi ScapeDood,

I reached out to you previously about helping you with scans as I live about an hour away. I had not responded because I was working on a deal. Long story short, I am now $2000 poorer and one complete collection of HeroScape richer.

Would you still like me to come through with whatever figures you're missing or have you figured out another solution?

:woot:

I was in conversation with Leaf It about him sending me the rest, but since leaf it is in UT, it would be much better if we handled it locally.

I'll PM you with some important details.

Leaf_It
July 8th, 2020, 04:53 PM
Long story short, I am now $2000 poorer and one complete collection of HeroScape richer.
:jawdrop: Nice.
Was that a complete collection all for $2000, or did you already have a good chunk, and this just completed what you had?

scapedood
July 21st, 2020, 12:33 PM
https://i.imgur.com/xxNN4Cc.jpg
Took some time to paint some Nagrubs I printed a while ago. Washes are painting on EZ mode. I literally used two colors and a wash.


Hi ScapeDood,

I reached out to you previously about helping you with scans as I live about an hour away. I had not responded because I was working on a deal. Long story short, I am now $2000 poorer and one complete collection of HeroScape richer.

Would you still like me to come through with whatever figures you're missing or have you figured out another solution?
Has anyone heard from Amarant? I haven't heard back since the initial PM.

superfrog
July 21st, 2020, 12:56 PM
The best way to stay in touch with Amarant is the heroscape discord (https://discord.gg/rtaFwCG) where he goes by Alexandros.

figwald
July 27th, 2020, 06:05 PM
Have the models been removed by thingiverse? I was able to access them yesterday and printed off some Romans, but now everything seems to load for a second and then say something went wrong.

MrNobody
July 27th, 2020, 06:07 PM
I've been having problems with Thingiverse in general for the past...day or so?

scapedood
July 27th, 2020, 10:18 PM
Have the models been removed by thingiverse? I was able to access them yesterday and printed off some Romans, but now everything seems to load for a second and then say something went wrong.

I just checked, they are still there for me.

Skulljack
July 29th, 2020, 04:44 PM
I have a fair number of the units you haven't yet scanned. PM me if your other options don't work out. I'll have to check to be sure, but off the top of my head I can supply Crest of the Valkyrie, 10th Regiment of Foot, anubian wolves, air elemental, brave arrow, capuan gladiators, chardris, DW7k, earth elemental, fen hydra, fire elemental, phantom knights, gorillinators, greenscales, grok riders, jorhdawn, macdirk, marrden hounds, microcorps, mohican river tribe, Raelin SotM, sahuagin raider, sir denrick, water elemental, wyvern.

scapedood
July 30th, 2020, 09:04 PM
I have a fair number of the units you haven't yet scanned. PM me if your other options don't work out. I'll have to check to be sure, but off the top of my head I can supply Crest of the Valkyrie, 10th Regiment of Foot, anubian wolves, air elemental, brave arrow, capuan gladiators, chardris, DW7k, earth elemental, fen hydra, fire elemental, phantom knights, gorillinators, greenscales, grok riders, jorhdawn, macdirk, marrden hounds, microcorps, mohican river tribe, Raelin SotM, sahuagin raider, sir denrick, water elemental, wyvern.

Thanks for the support!

Been in talks with Amarant this week and am expecting them to deliver the first batch this week.

If i need the assistance, i'll let you know, but I'm hoping it works out with Amarant because they we are in the same state.

scapedood
August 12th, 2020, 12:11 PM
Good news everyone!

Yesterday, Amarant dropped off the first batch of the remaining figures.

I'm going to scan, post process, and upload them to thingiverse all at once when i'm done with them.

However, due to the hype of it, I already uploaded the Zelrig scan, because Zelrig!

Again, big thanks to Amarant!

White Knight
August 12th, 2020, 02:06 PM
Good news everyone!

Yesterday, Amarant dropped off the first batch of the remaining figures.

I'm going to scan, post process, and upload them to thingiverse all at once when i'm done with them.

However, due to the hype of it, I already uploaded the Zelrig scan, because Zelrig!

Again, big thanks to Amarant!
:excited:

scapedood
August 23rd, 2020, 11:13 AM
First batch from Amarant is finished; the following figures have been added:

10th Regiment of Foot
4th Massachusetts Line
Acolarh
Air Elemental
Armoc Vipers
Atlaga the Kyrie Warrior
Black Wyrmling
Blue Wyrmling
Brave Arrow
Chadris
Concan the Kyrie Warrior
Earth Elemental
Fire Elemental
Greater Ice Elemental
Greenscale Warriors
Gurei-Oni
Hatamoto Taro
Kee-Mo-Shi
Omnicron Snipers
Phantom Knights
Protectors of Ullar
Red Wyrmling
Sahuagin Raider
Samuel Brown
Saylind the Kyrie Warrior
Sir Gilbert
Sudema
Tul-Bak-Ra
Water Elemental
White Wyrmling
Wo-Sa-Ga
Zelrig
Zetacron

Second batch is just as big, will start working on them on Monday.

scapedood
August 23rd, 2020, 07:38 PM
Whoops. missed uploading Zetacron, fixed.

White Knight
August 23rd, 2020, 08:14 PM
:excited:

scapedood
August 23rd, 2020, 09:17 PM
:excited:
:excited:

Flash_19
August 24th, 2020, 12:53 AM
:excited:
:excited:

I'm SO excited!!! Already got a squad of Greenscales printed, pounding out some 10th Reg right now.

Thanks so much scapedood for all your work on this, and thanks to you Amarant for your efforts and for providing the models!

Guillermo-Tell
August 25th, 2020, 09:50 AM
Hi scapedood,

I'm trying to download all the files at once, but I've noticed Thingiverse says you have 154 designs while I can only see 151 in the main list. Am I missing something? Could you add a model count somewhere to make things clear?

Thanks.

MementoMori
September 10th, 2020, 09:05 PM
As always, I'm away from the site for a few months and find a perfect gem on my return. These scans are priceless!!

Can't wait to get the obsidian guards to print them with my newly arrived clear red resin.

White Knight
September 10th, 2020, 11:33 PM
As always, I'm away from the site for a few months and find a perfect gem on my return. These scans are priceless!!

Can't wait to get the obsidian guards to print them with my newly arrived clear red resin.
I used clear PLA, but it works better for the Fire Elementals than the Obsidian Guards.


http://www.mediafire.com/convkey/124d/5mq1m7cagrmi6t0zg.jpg

MementoMori
September 11th, 2020, 10:11 AM
With clear resin you can obtain incredible transparent prints after applying a glossy varnish. In this picture the models in the middle have been coated, this is what I expect to do with red obsidian guards.

http://www.mediafire.com/convkey/2aac/hpnh208vhz92ie2zg.jpg

Tornado
September 11th, 2020, 10:18 AM
Does that six sided have teeth?

White Knight
September 11th, 2020, 10:25 AM
With clear resin you can obtain incredible transparent prints after applying a glossy varnish. In this picture the models in the middle have been coated, this is what I expect to do with red obsidian guards.

http://www.mediafire.com/convkey/2aac/hpnh208vhz92ie2zg.jpg
I just got my resin printer. Right now I only have gray and smoky clear resins. I'll be posting some pictures soon.

And nice mimic! haha :D

MementoMori
September 11th, 2020, 10:57 AM
Does that six sided have teeth?

It reminds me that a bad roll can hurt!! https://www.thingiverse.com/thing:3334400

With clear resin you can obtain incredible transparent prints after applying a glossy varnish. In this picture the models in the middle have been coated, this is what I expect to do with red obsidian guards.

http://www.mediafire.com/convkey/2aac/hpnh208vhz92ie2zg.jpg
I just got my resin printer. Right now I only have gray and smoky clear resins. I'll be posting some pictures soon.

And nice mimic! haha :D

Once you go resin, you won't go back. At least for printing miniatures!! I got mine a month or so ago and it's been working nonstop, love water washable resin.

scapedood
September 13th, 2020, 12:22 AM
The following figures have been added:

Anubian Wolves
Ashigaru Harquebus
Ashigaru Yari
Aubrien Archers
Axegrinders of Burning Forge
Fyorlag Spiders
Gladiatrons
MacDirk Warriors
Mohican River Tribe
Omnicron Repulsors
Quasatch Hunters
Shaolin Monks
Venoc Vipers
Fen Hydra
Master of the Hunt
Mind Flayer Mastermind
Wyvern
Johnny “Shotgun” Sullivan
Migol Ironwill
Moltenclaw
Sujoah

Flash_19
September 13th, 2020, 12:37 AM
The following figures have been added:

Anubian Wolves
Ashigaru Harquebus
Ashigaru Yari
Aubrien Archers
Axegrinders of Burning Forge
Fyorlag Spiders
Gladiatrons
MacDirk Warriors
Mohican River Tribe
Omnicron Repulsors
Quasatch Hunters
Shaolin Monks
Venoc Vipers
Fen Hydra
Master of the Hunt
Mind Flayer Mastermind
Wyvern
Johnny ďShotgunĒ Sullivan
Migol Ironwill
Moltenclaw
Sujoah

:woot:
Thank you good sir!!!

superfrog
September 13th, 2020, 01:08 AM
For completeness, that also checks off the Dzu-Teh (same sculpts as the Quasatch Hunters) and Master Win Chiu Woo (same sculpt as one of the Shaolin Monks).

Edit: you're already on it! Thanks!

MementoMori
September 13th, 2020, 08:10 AM
Thanks for your kind work!!

I quickly run to check Fyorlag spiders (along with Wo Sa Ga and Gurei Oni, one of the units that can't never manage to get), and found that Fyorlag Spider number 3 has some problems.

Importing to blender doesn't show the model, chitubox said invalid file and cura shows only right half of the spider and a leg from the other side. The rest is missing.

Edit to avoid double-posting:

http://www.mediafire.com/convkey/6e97/hgkleb4tywweu7jzg.jpg

Printed Gurei Oni. Elegoo Mars and water washable green resin.

scapedood
September 14th, 2020, 08:19 PM
Thanks for your kind work!!

I quickly run to check Fyorlag spiders (along with Wo Sa Ga and Gurei Oni, one of the units that can't never manage to get), and found that Fyorlag Spider number 3 has some problems.

Importing to blender doesn't show the model, chitubox said invalid file and cura shows only right half of the spider and a leg from the other side. The rest is missing.

Edit to avoid double-posting:

http://www.mediafire.com/convkey/6e97/hgkleb4tywweu7jzg.jpg

Printed Gurei Oni. Elegoo Mars and water washable green resin.

Hello, I just reuploaded spider 3. I had some goofy things happen with thingiverse when i uploaded this batch, it's possible it got corrupted on their end as it's fine on my local file. Let me know if you run into any more corrupted files.

Dagger
September 15th, 2020, 01:39 AM
Thanks for all the files Scapedood.

Dagger
September 15th, 2020, 07:50 PM
I can not get spider 3 to load on Chitubox. He's missing half his body.

robbdaman
September 15th, 2020, 08:00 PM
I can not get spider 3 to load on Chitubox. He's missing half his body.

I just downloaded it and it looks fine to me on Blender and Cura. Try downloading it again, he updated it yesterday or today.

MementoMori
September 15th, 2020, 08:28 PM
I redownloaded it and it was fine.

Dagger
September 15th, 2020, 10:31 PM
I redownloaded it yesterday and today and I still can't get it to work? Any suggestions?

White Knight
September 16th, 2020, 02:12 AM
I redownloaded it yesterday and today and I still can't get it to work? Any suggestions?
I downloaded all three spiders today and they opened without any problems.

Dagger
September 16th, 2020, 12:51 PM
I redownloaded it yesterday and today and I still can't get it to work? Any suggestions?
I downloaded all three spiders today and they opened without any problems.

I don't know what I'm doing wrong. This is the file we're talking about right? https://www.thingiverse.com/thing:4595375

I downloaded it again today and saved it to a different location opened spider 3 in Chitubox and half of him is missing. Tried opening in 3D Builder and it gave me an error code.

I am also very new at this. I just got my elegoo Mars last Thursday. So I appreciate any help and grace at this point.

robbdaman
September 16th, 2020, 02:17 PM
I don't use Chitubox or 3D Builder. See if Cura works. Heck the innate 3D program for your OS should show something.

MementoMori
September 16th, 2020, 03:12 PM
I redownloaded it yesterday and today and I still can't get it to work? Any suggestions?
I downloaded all three spiders today and they opened without any problems.

I don't know what I'm doing wrong. This is the file we're talking about right? https://www.thingiverse.com/thing:4595375

I downloaded it again today and saved it to a different location opened spider 3 in Chitubox and half of him is missing. Tried opening in 3D Builder and it gave me an error code.

I am also very new at this. I just got my elegoo Mars last Thursday. So I appreciate any help and grace at this point.

Tried to open in chitubox and everything show just fine. Try to download the individual spider.

https://www.thingiverse.com/download:8693702

Dagger
September 16th, 2020, 06:05 PM
I redownloaded it yesterday and today and I still can't get it to work? Any suggestions?
I downloaded all three spiders today and they opened without any problems.

I don't know what I'm doing wrong. This is the file we're talking about right? https://www.thingiverse.com/thing:4595375

I downloaded it again today and saved it to a different location opened spider 3 in Chitubox and half of him is missing. Tried opening in 3D Builder and it gave me an error code.

I am also very new at this. I just got my elegoo Mars last Thursday. So I appreciate any help and grace at this point.

Tried to open in chitubox and everything show just fine. Try to download the individual spider.

https://www.thingiverse.com/download:8693702
Downloading the individual Spider worked. I was downloading all files. Thanks for the help.

TREX
September 28th, 2020, 03:03 AM
Thanks for all the work on these scapedood. Just finished downloading all the next batch of models. The ones I was able to take a quick look at look awesome. I can't wait to get a bunch of my favorite models printed out on my resin printer and painted up in custom colors.

TREX
October 7th, 2020, 01:23 PM
I printed up 4 squads of the axegrinders on my resin printer the other day. These are fantastic scans and I really love putting paint on them in resin. Cant rep you at the moment scapedood, but you deserve it sir.

scapedood
October 7th, 2020, 02:57 PM
I printed up 4 squads of the axegrinders on my resin printer the other day. These are fantastic scans and I really love putting paint on them in resin. Cant rep you at the moment scapedood, but you deserve it sir.

<3 ty

Riku4470
October 11th, 2020, 05:26 AM
Hello love these scans. They look perfect out of my resin printer. I was wondering though does anyone know of a forum or a discussion of any kind of what would be the colors used on for each unit of heroscape. Example in warhammer 40k they have each unit and how to paint it. Is there any list of these colors for heroscape figures? Thank you!

scapedood
October 11th, 2020, 11:54 AM
Hello love these scans. They look perfect out of my resin printer. I was wondering though does anyone know of a forum or a discussion of any kind of what would be the colors used on for each unit of heroscape. Example in warhammer 40k they have each unit and how to paint it. Is there any list of these colors for heroscape figures? Thank you!

I would also like to know this lol. I just mix paints until I'm happy.

Fallen Templar
October 13th, 2020, 12:36 AM
Hey thanks doing this scaperdood with that fancy einscan.se! If you need help with with cleaning up the scans let me know, I have access to Metashape professional through a few clients and would be happy to run the files through. I can also probably help with the paint recommendation in the future once I print these on an SLA but as of right now white knight has painted up a few of Aquila Alliance models and his mixes were pretty spot on
They are in his 3d files thread.

scapedood
October 13th, 2020, 11:48 AM
Hey thanks doing this scaperdood with that fancy einscan.se! If you need help with with cleaning up the scans let me know, I have access to Metashape professional through a few clients and would be happy to run the files through. I can also probably help with the paint recommendation in the future once I print these on an SLA but as of right now white knight has painted up a few of Aquila Alliance models and his mixes were pretty spot on
They are in his 3d files thread.

You are more than welcome to clean up the files :)

I don't know what you would need for that.

Fallen Templar
October 16th, 2020, 05:46 AM
Hey thanks doing this scaperdood with that fancy einscan.se! If you need help with with cleaning up the scans let me know, I have access to Metashape professional through a few clients and would be happy to run the files through. I can also probably help with the paint recommendation in the future once I print these on an SLA but as of right now white knight has painted up a few of Aquila Alliance models and his mixes were pretty spot on
They are in his 3d files thread.

You are more than welcome to clean up the files :)

I don't know what you would need for that. I'll dig around and let ya know, I'm mostly working on landscape photogrammetry projects but the software handles scans. I've have been testing accuracy on small scale subjects as something to do during lockdown and my meshes from a single camera photogrammetry setup have been 99% accurate, can't say 100 because sometimes I've gotta smooth the meshes sometimes. Anyway I'll drop you a PM when I know what exactly I need for the workflow

TREX
October 20th, 2020, 06:16 PM
Is there any interest in putting pre supported build plates of figures on here. Granted its not too big of a pain to do. Im no professional as far as supports go but am pretty good at it. Im making all my chitubox buildplates into stl files for my brother so he can slice them for his anycubic photon. No sense in us both doing the work. I fill the entire build plate up when possible. Some units are combined on a plate. Commons are generally put on a build plate with each other and uniques are put on a plate with each other. Sometimes Ill throw some extra common heroes on a build plate to fill a unique one. Ex. Fire elementals. I fit 9 on a plate but also threw a couple in with my kitbashed unique quasatch models. Scapedood your work is top notch. I cant remember what you said to do about the one fyorlag spider that is only a half spider?

scapedood
October 20th, 2020, 08:31 PM
If you want to do that, you are more than welcome to. I would be happy to link to a side forum post if you wanted to. But quite honestly i don't feel like loading all those extra links lol.

TREX
November 1st, 2020, 12:44 AM
If you want to do that, you are more than welcome to. I would be happy to link to a side forum post if you wanted to. But quite honestly i don't feel like loading all those extra links lol.
I hear you. Makes sense. It is a lot of work to upload all these to this site. I'm sure I'm not the only one wondering what else you need from the community to help you get the remainder of the sculpts scanned. What you are doing here with White Knight with the 3d files for scape figures is changing things for the greater for the community. I've been printing tons of your models off lately and they are simply amazing. Let the community know what it is that we can do to get you what you need to get the rest of them uploaded.

-Still can't give anymore rep to Scapedood until I spread it around.

White Knight
November 1st, 2020, 01:30 AM
I still can't give him rep either.

White Knight
November 4th, 2020, 08:30 PM
I noticed that Sujoah's left inner wing has some scanning issues.

I'm going to clean up the model a little (basically mirror the right inner wing to the left side). I'm just trying to decide whether to make the wings removable or not...

japes
November 4th, 2020, 10:29 PM
not sure if this is possible or not but I'll ask anyway. Is it possible to mirror the ruins?

TREX
November 4th, 2020, 10:31 PM
not sure if this is possible or not but I'll ask anyway. Is it possible to mirror the ruins?

Its as simple as clicking the x axis mirror button in pretty much any slicer. I thought someone had posted them already but it can be done very easily.

A3n
November 5th, 2020, 02:00 AM
not sure if this is possible or not but I'll ask anyway. Is it possible to mirror the ruins?

Its as simple as clicking the x axis mirror button in pretty much any slicer. I thought someone had posted them already but it can be done very easily.

They're listed in Yodaking's 3D Printed Stl Files thread (https://www.heroscapers.com/community/showthread.php?t=52903).

robbdaman
November 5th, 2020, 12:25 PM
not sure if this is possible or not but I'll ask anyway. Is it possible to mirror the ruins?

Its as simple as clicking the x axis mirror button in pretty much any slicer. I thought someone had posted them already but it can be done very easily.

They're listed in Yodaking's 3D Printed Stl Files thread (https://www.heroscapers.com/community/showthread.php?t=52903).

Yep, terrain is over in the custom terrain area. Flipping it was easy as TREX mentioned. It's Scapedood's great scan though.

Yodaking
November 5th, 2020, 03:35 PM
Yeah, I should get out my printer and see if it will print the reverse ones. Being able to build out maps with walls facing both directions would be cool.

Tornado
November 5th, 2020, 03:53 PM
You still have the Micro YK?
I never got to use mine. My friend broke it before I ever got a chance.

I have an Ender and an Oarnge resin printer still in the boxes. Really need to get those set up. :)

Yodaking
November 5th, 2020, 04:12 PM
Yeah, I have it but haven't touched it in a few years now. Ended up being a little disappointed with it's user interface and just stopped messing around with it.

TREX
November 5th, 2020, 05:03 PM
You still have the Micro YK?
I never got to use mine. My friend broke it before I ever got a chance.

I have an Ender and an Oarnge resin printer still in the boxes. Really need to get those set up. :)

After getting my resin printer all fixed up Ive made hundreds of models. Ive easily made over 500 miniatures on the resin printer total now. Ive made full armies for star wars legion and have updated a ton of my heroscape ranks. Ive been making a minimum of 6 squads of each common so far. Get that orange set up and I can help you troubleshoot anything you run into.

Tornado
November 5th, 2020, 06:55 PM
Sweet.
How much resin have you used?
You keep the tank full all the time?
Do you buy it by the gallon?

That requires ventilation?
That may take some thought.

TREX
November 5th, 2020, 07:18 PM
Sweet.
How much resin have you used?
You keep the tank full all the time?
Do you buy it by the gallon?

That requires ventilation?
That may take some thought.

Ive used right at 4500 ml of resin. Roughly 4 1000ml bottles and a 500ml bottle that came with my machine. I just ordered another 1000ml bottle. I have a fan/exhaust system connected to an enclosure. I run my machine around the clock so I leave resin in there. If its not in direct sunlight or doesnt sit there too long undisturbed it is ok. I buy on amazon and pick up the larger bottle.

White Knight
November 5th, 2020, 10:24 PM
My printer is still in the garage. It's been doing great out there. Just finished two Zelrigs. I'm going to be printing Sujoah soon.

White Knight
November 6th, 2020, 01:22 AM
My Aquilla's Alliance files
(with posts on the bottom for mounting to a base)
(I fixed Sujoah's wing, and I split Zelrig for resin printing)
(I also decimated each of them to 10% to 20% so they take up less memory)
(remember to multiply by 2540% to convert inches to mm)

Gurei-Oni (https://drive.google.com/file/d/1Cx4DGebU6WH5IBh1JtViO85PrQXbapuX/view?usp=sharing)
Sujoah (https://drive.google.com/file/d/1D1_c8ZPRfg1qRxELWmHn6XjCLELwWXWE/view?usp=sharing)
Wo-Sa-Ga (https://drive.google.com/file/d/1A3z9Lo44mDWxMrRzY5PvzTrzIA7xlIfd/view?usp=sharing)
Zelrig body (https://drive.google.com/file/d/1-KmjSMq4F97LdPkUPURTTqxLaJa_vPez/view?usp=sharing)
Zelrig left wing (https://drive.google.com/file/d/1sIRGM8qV17kJrLUjfEa5hxS3rx51njnO/view?usp=sharing)
Zelrig right wing (https://drive.google.com/file/d/1uHgUK5SLqlEny-J1MpPEK0VetxN7B44v/view?usp=sharing)
Zetacron (https://drive.google.com/file/d/1__EIpyUXfUPDoJP9nT38a_v2-srEzFnd/view?usp=sharing)

Note:
When I printed them, I hollowed out Sujoah, Zelrig's body, Gurei-Oni, and Wo-Sa-Ga (1.5 to 2.0mm) to reduce the amount of resin. Don't forget your drain holes (to allow air to equalize and prevent suction).

LilMoochie
November 11th, 2020, 11:09 AM
These scans are so helpful. At first I was a little cheesed off that there's no bases (have to print them separately) but I quickly realized that without bases you can reorient them in your slicer for a much cleaner print with fewer failed supports. It's nice having both these AND White-Knight's scans to choose from.

The Fyorlag #3 is not rendering correctly in my slicer. Is it something I'm doing wrong or is it a problem with the scan?

White Knight
November 11th, 2020, 12:19 PM
These scans are so helpful. At first I was a little cheesed off that there's no bases (have to print them separately) but I quickly realized that without bases you can reorient them in your slicer for a much cleaner print with fewer failed supports. It's nice having both these AND White-Knight's scans to choose from.

The Fyorlag #3 is not rendering correctly in my slicer. Is it something I'm doing wrong or is it a problem with the scan?
Download the spiders one at a time (don't download ALL). Scapedood re-uploaded the fixed file, but the download ALL link still links to the older file.

TREX
November 11th, 2020, 12:25 PM
These scans are so helpful. At first I was a little cheesed off that there's no bases (have to print them separately) but I quickly realized that without bases you can reorient them in your slicer for a much cleaner print with fewer failed supports. It's nice having both these AND White-Knight's scans to choose from.

The Fyorlag #3 is not rendering correctly in my slicer. Is it something I'm doing wrong or is it a problem with the scan?
Download the spiders one at a time (don't download ALL). Scapedood re-uploaded the fixed file, but the download ALL link still links to the older file.
This worked for me as well. Before spider 3 only was half there in Chitubox. I personally like having the bases separate for multiple reasons. First because I print all my bases on fdm and all my figures in resin. Second, when they are separate I am able to print them upside down which prints faster and doesn't use any support material. Third, printing separate allows the use of a base sticker, if you want one.

scapedood
November 14th, 2020, 05:02 PM
Big batch...Been super busy, and alot of these had some fixing to be done...

The following figures have been added:

Alastair MacDirk
Blastatrons
Capuan Gladiators
Deathreavers
Deathstalkers
Deathwalker 7000
Frost Giant of Morh
Goblin Cutters
Gorillinators
Granite Guardians
Ice Troll Berserker
Iron Golem
Jorhdawn
Kumiko
Laglor
Major X17
Marro Dividers
Morsbane
Obsidian Guards
Ogre Warhulk
Sentinels of Jandar
Sir Denrick
Sonlen
Valguard
Werewolf Lord
Wolves of Badru

TREX
November 14th, 2020, 06:26 PM
Big batch...Been super busy, and alot of these had some fixing to be done...

The following figures have been added:

Alastair MacDirk
Blastatrons
Capuan Gladiators
Deathreavers
Deathstalkers
Deathwalker 7000
Frost Giant of Morh
Goblin Cutters
Gorillinators
Granite Guardians
Ice Troll Berserker
Iron Golem
Jorhdawn
Kumiko
Laglor
Major X17
Marro Dividers
Morsbane
Obsidian Guards
Ogre Warhulk
Sentinels of Jandar
Sir Denrick
Sonlen
Valguard
Werewolf Lord
Wolves of Badru

Awesome. Nice work.

White Knight
November 14th, 2020, 10:48 PM
Big batch...Been super busy, and alot of these had some fixing to be done...

The following figures have been added:

Alastair MacDirk
Blastatrons
Capuan Gladiators
Deathreavers
Deathstalkers
Deathwalker 7000
Frost Giant of Morh
Goblin Cutters
Gorillinators
Granite Guardians
Ice Troll Berserker
Iron Golem
Jorhdawn
Kumiko
Laglor
Major X17
Marro Dividers
Morsbane
Obsidian Guards
Ogre Warhulk
Sentinels of Jandar
Sir Denrick
Sonlen
Valguard
Werewolf Lord
Wolves of Badru
Shoot, if I knew you would be coming out with these I wouldn't have bothered with the Ice Troll or Frost Giant...

Awesome job! :) :thumbsup:


I'm also happy to say that my services for the classic figures are no longer needed--we have either Scapedood's scans for my matte scans for every classic figure.


On to C3V!

Flash_19
November 15th, 2020, 01:07 AM
Big batch...Been super busy, and alot of these had some fixing to be done...


Awesome work scapedood! So excited for this batch of figures! Thank you so much for your time and effort on this.

MementoMori
November 15th, 2020, 09:29 AM
Downloaded them, checked them, printing some right now!

LilMoochie
November 25th, 2020, 08:55 AM
Thanks so much for the scans. I'm very happy with the way they are turning out!
Here's my first batch of prints, strutting their stuff on my printed lava sets. The painting won't win any awards but I'm learning how to get the colors and washes right. It's hard to clean the figures up without breaking fragile legs. arms, and weapons.
https://i.imgur.com/KoUC4T3.jpg

Repulsors actually came out pretty good. The intricate angles were tough but I think they'd look better if my wash was better

https://i.imgur.com/JLazFoS.jpg

Shades turned out pretty good, too. My wash is still "off" and it's not really "shading" like it should
https://i.imgur.com/ZXfXz34.jpg

Zombies turned out greener than I intended but they'll do the job.

https://i.imgur.com/eYNS00A.jpg

Spider legs were a major headache to get right. I think to do it again I'd buy/barter for a resin print.

https://i.imgur.com/jQAUdhd.jpg

MementoMori
November 25th, 2020, 04:14 PM
Here are some of mine.

https://i.imgur.com/LTDPilG.jpeghttps://i.imgur.com/16UFJMq.jpeg

scapedood
November 26th, 2020, 01:14 PM
Definitely recommend resin printing if you can find someone who has one.

But happy to see the scans are getting good use <3

Myth26
December 4th, 2020, 09:41 PM
This all looks amazing! I gots to get me a 3D printer!!!

superfrog
December 15th, 2020, 03:57 PM
Anycubic has their Photon on sale for $169 right now (+free shipping) if anybody wants to snag one like I just did!

Lucace
December 16th, 2020, 07:03 PM
Is there any interest in putting pre supported build plates of figures on here. Granted its not too big of a pain to do. Im no professional as far as supports go but am pretty good at it. Im making all my chitubox buildplates into stl files for my brother so he can slice them for his anycubic photon. No sense in us both doing the work. I fill the entire build plate up when possible. Some units are combined on a plate. Commons are generally put on a build plate with each other and uniques are put on a plate with each other. Sometimes Ill throw some extra common heroes on a build plate to fill a unique one. Ex. Fire elementals. I fit 9 on a plate but also threw a couple in with my kitbashed unique quasatch models. Scapedood your work is top notch. I cant remember what you said to do about the one fyorlag spider that is only a half spider?

I would be very interested in these if you have easy access to them! I just ordered a photon and am excited to get started. Any tips for anything?

Also, I am wondering if any of these models need to be scaled or anything or if they are good after download? I am using Chitubox currently but would switch if anyone has any recommendations for slicing software to use.

TREX
December 16th, 2020, 07:48 PM
Is there any interest in putting pre supported build plates of figures on here. Granted its not too big of a pain to do. Im no professional as far as supports go but am pretty good at it. Im making all my chitubox buildplates into stl files for my brother so he can slice them for his anycubic photon. No sense in us both doing the work. I fill the entire build plate up when possible. Some units are combined on a plate. Commons are generally put on a build plate with each other and uniques are put on a plate with each other. Sometimes Ill throw some extra common heroes on a build plate to fill a unique one. Ex. Fire elementals. I fit 9 on a plate but also threw a couple in with my kitbashed unique quasatch models. Scapedood your work is top notch. I cant remember what you said to do about the one fyorlag spider that is only a half spider?

I would be very interested in these if you have easy access to them! I just ordered a photon and am excited to get started. Any tips for anything?

Also, I am wondering if any of these models need to be scaled or anything or if they are good after download? I am using Chitubox currently but would switch if anyone has any recommendations for slicing software to use.

All of scapedoods models are the right size. I've ran into a couple very small issues on just a few of them but nothing that can't be easily fixed. I looked into loading up full build plates of models on here, but the load times it would take me to put them on here would be horrendously slow for me. My pointers for using chitubox for supports is using medium auto supports at 60% density with your models rotated roughly 15% backward. The reason for the slightly tilted models is so there is less suction force and smaller areas such as the heel of the foot rather than the whole foot to start at once creating less failures. I recommend a Youtuber called 3d Printing Pro. He does a great job describing islands and how to support models to make files without fails. I do use auto supports but also go in afterwards and manually place supports where I see that it missed them. It does that from time to time. If the area is particularly large, I'll even place a few heavy supports.

Lucace
December 16th, 2020, 07:51 PM
I would be very interested in these if you have easy access to them! I just ordered a photon and am excited to get started. Any tips for anything?

Also, I am wondering if any of these models need to be scaled or anything or if they are good after download? I am using Chitubox currently but would switch if anyone has any recommendations for slicing software to use.

All of scapedoods models are the right size. I've ran into a couple very small issues on just a few of them but nothing that can't be easily fixed. I looked into loading up full build plates of models on here, but the load times it would take me to put them on here would be horrendously slow for me. My pointers for using chitubox for supports is using medium auto supports at 60% density with your models rotated roughly 15% backward. The reason for the slightly tilted models is so there is less suction force and smaller areas such as the heel of the foot rather than the whole foot to start at once creating less failures. I recommend a Youtuber called 3d Printing Pro. He does a great job describing islands and how to support models to make files without fails. I do use auto supports but also go in afterwards and manually place supports where I see that it missed them. It does that from time to time. If the area is particularly large, I'll even place a few heavy supports.

That is perfect. Thank you so much for your help. Iím excited to try it!

MementoMori
December 17th, 2020, 07:08 AM
I recently switched from Chitubox's supports to PrusaSlicer's.

My process is as follows:

1. Setup PrusaSlicer, as an SL1 printer (it won't matter what's your printer).
2. Load model in PrusaSlicer.
3. Auto orient mini (repeat as many times as needed until it's oriented without supports in critical parts, like faces).
4. Auto support mini.
5. Export mini with supports.
6. Load supported mini in Chitubox.
7. Fix print file in Photo File Validator.

Repeat steps 2-7 for each mini. Since I've been doing this I've had no problems with my prints.

Lucace
January 8th, 2021, 03:31 PM
Iíve been printing a ton of stuff off on my new photon and canít believe how great they are turning out. If anyone is hesitant to buy a printer, I canít recommend it enough. http://i.postimg.cc/3wkvJyzn/086-B680-B-6795-4-C34-8889-0-FE92-CD85-ED8.jpghttps://i.postimg.cc/W1WZvmYd/684-C474-B-A617-4-CA1-A8-CE-9995364-CCB44.jpg https://i.postimg.cc/VLFM7PjB/87873186-51-A2-435-F-AF4-B-A6948579-A38-B.jpghttps://i.postimg.cc/q7WCtJT0/C38-C228-F-A32-B-46-AB-8933-555596-D4-FBF3.jpghttps://i.postimg.cc/V6M0nxft/F91-E1276-E824-4-B66-AD97-BCD7-AD4-FA6-D9.jpg

Thanks to all of the work that whiteknight and scapedood are doing, everyone should be able to get all of the heroscape they could ever want. The even better thing is that they can do it for a fraction of the price that things were selling for back when things were still being released.

TREX
January 8th, 2021, 04:24 PM
Iíve been printing a ton of stuff off on my new photon and canít believe how great they are turning out. If anyone is hesitant to buy a printer, I canít recommend it enough. http://i.postimg.cc/3wkvJyzn/086-B680-B-6795-4-C34-8889-0-FE92-CD85-ED8.jpghttps://i.postimg.cc/W1WZvmYd/684-C474-B-A617-4-CA1-A8-CE-9995364-CCB44.jpg https://i.postimg.cc/VLFM7PjB/87873186-51-A2-435-F-AF4-B-A6948579-A38-B.jpghttps://i.postimg.cc/q7WCtJT0/C38-C228-F-A32-B-46-AB-8933-555596-D4-FBF3.jpghttps://i.postimg.cc/V6M0nxft/F91-E1276-E824-4-B66-AD97-BCD7-AD4-FA6-D9.jpg

Thanks to all of the work that whiteknight and scapedood are doing, everyone should be able to get all of the heroscape they could ever want. The even better thing is that they can do it for a fraction of the price that things were selling for back when things were still being released.

Not sure what resin you are using but, I just switched over to siraya tech fast grey. Ive mixed it in with my mix of longer and anycubic resin that was in my vat to finish them off. Even with a mix of it, it has made the last handful of prints much more sturdy and less fragile. I highly recommend it. Ive printed hundreds of models. Hopefully you are filling your buildplate to the max to get more minis quickly. I also love the models and recommend resin printing to get as much scape as you want for a fraction of the price.

Lucace
January 8th, 2021, 05:40 PM
Iíve been printing a ton of stuff off on my new photon and canít believe how great they are turning out. If anyone is hesitant to buy a printer, I canít recommend it enough. http://i.postimg.cc/3wkvJyzn/086-B680-B-6795-4-C34-8889-0-FE92-CD85-ED8.jpghttps://i.postimg.cc/W1WZvmYd/684-C474-B-A617-4-CA1-A8-CE-9995364-CCB44.jpg https://i.postimg.cc/VLFM7PjB/87873186-51-A2-435-F-AF4-B-A6948579-A38-B.jpghttps://i.postimg.cc/q7WCtJT0/C38-C228-F-A32-B-46-AB-8933-555596-D4-FBF3.jpghttps://i.postimg.cc/V6M0nxft/F91-E1276-E824-4-B66-AD97-BCD7-AD4-FA6-D9.jpg

Thanks to all of the work that whiteknight and scapedood are doing, everyone should be able to get all of the heroscape they could ever want. The even better thing is that they can do it for a fraction of the price that things were selling for back when things were still being released.

Not sure what resin you are using but, I just switched over to siraya tech fast grey. Ive mixed it in with my mix of longer and anycubic resin that was in my vat to finish them off. Even with a mix of it, it has made the last handful of prints much more sturdy and less fragile. I highly recommend it. Ive printed hundreds of models. Hopefully you are filling your buildplate to the max to get more minis quickly. I also love the models and recommend resin printing to get as much scape as you want for a fraction of the price.

Iíve been getting as much as I think I can on the build plates. 3D printer pro on YouTube that you recommended has been a huge help. Iíll definitely check out that resin. I bought a 3 kg of the elegoo white resin and thatís what Iíve been using so far with no problems.

White Knight
January 8th, 2021, 07:26 PM
I use Siraya fast also--mostly the smoky gray color. The figures are definitely more durable than regular resin.

TREX
January 8th, 2021, 09:35 PM
Iíve been printing a ton of stuff off on my new photon and canít believe how great they are turning out. If anyone is hesitant to buy a printer, I canít recommend it enough. http://i.postimg.cc/3wkvJyzn/086-B680-B-6795-4-C34-8889-0-FE92-CD85-ED8.jpghttps://i.postimg.cc/W1WZvmYd/684-C474-B-A617-4-CA1-A8-CE-9995364-CCB44.jpg https://i.postimg.cc/VLFM7PjB/87873186-51-A2-435-F-AF4-B-A6948579-A38-B.jpghttps://i.postimg.cc/q7WCtJT0/C38-C228-F-A32-B-46-AB-8933-555596-D4-FBF3.jpghttps://i.postimg.cc/V6M0nxft/F91-E1276-E824-4-B66-AD97-BCD7-AD4-FA6-D9.jpg

Thanks to all of the work that whiteknight and scapedood are doing, everyone should be able to get all of the heroscape they could ever want. The even better thing is that they can do it for a fraction of the price that things were selling for back when things were still being released.

Not sure what resin you are using but, I just switched over to siraya tech fast grey. Ive mixed it in with my mix of longer and anycubic resin that was in my vat to finish them off. Even with a mix of it, it has made the last handful of prints much more sturdy and less fragile. I highly recommend it. Ive printed hundreds of models. Hopefully you are filling your buildplate to the max to get more minis quickly. I also love the models and recommend resin printing to get as much scape as you want for a fraction of the price.

Iíve been getting as much as I think I can on the build plates. 3D printer pro on YouTube that you recommended has been a huge help. Iíll definitely check out that resin. I bought a 3 kg of the elegoo white resin and thatís what Iíve been using so far with no problems.

If you dont mind the color variation you can mix a smaller amount of siraya in with the other stuff and it will sturdy them up even then.

TREX
January 8th, 2021, 09:37 PM
I use Siraya fast also--mostly the smoky gray color. The figures are definitely more durable than regular resin.

I love this stuff. If you can make those files available for those c3v figures, Ill help you do them all this weekend. I can handle them easily with my new best friend Meshmixer.

White Knight
January 8th, 2021, 11:06 PM
I use Siraya fast also--mostly the smoky gray color. The figures are definitely more durable than regular resin.

I love this stuff. If you can make those files available for those c3v figures, Ill help you do them all this weekend. I can handle them easily with my new best friend Meshmixer.
I'm getting there. I'll definitely post some tonight.

Myth26
January 8th, 2021, 11:23 PM
I use Siraya fast also--mostly the smoky gray color. The figures are definitely more durable than regular resin.

I love this stuff. If you can make those files available for those c3v figures, Ill help you do them all this weekend. I can handle them easily with my new best friend Meshmixer.

Allow me to try to help. I have made a mod with tokens and cards (they are different) for the army cards for all the C3V and SoV units. The rate limiting step has been getting models for figures, so this should go fast!

I use Siraya fast also--mostly the smoky gray color. The figures are definitely more durable than regular resin.

I love this stuff. If you can make those files available for those c3v figures, Ill help you do them all this weekend. I can handle them easily with my new best friend Meshmixer.
I'm getting there. I'll definitely post some tonight.

Thank you so much for doing this!

White Knight
January 9th, 2021, 12:28 AM
Set of lower resolution C3V scans (mostly in Blender) (https://drive.google.com/drive/folders/1BHRgsDzjLqrHSOTEqqIlrbXxkMr-N3MV?usp=sharing)

Higher resolution C3V scans (https://drive.google.com/drive/folders/1D2qi6Eit6bUy41gxEsryUqyzQDuZ9OCL?usp=sharing)

These files need cleanup before printing.

TREX
January 9th, 2021, 12:40 AM
I use Siraya fast also--mostly the smoky gray color. The figures are definitely more durable than regular resin.

I love this stuff. If you can make those files available for those c3v figures, Ill help you do them all this weekend. I can handle them easily with my new best friend Meshmixer.
I'm getting there. I'll definitely post some tonight.
Sweet. Just tag me when you do and I'll get started. I'm just building build plates of figures to load onto the printer. I'm currently just printing out some that have been on the sd card for awhile to kill me enough time to get my new batches together.

White Knight
January 9th, 2021, 12:57 AM
Set of lower resolution C3V scans (mostly in Blender) (https://drive.google.com/drive/folders/1BHRgsDzjLqrHSOTEqqIlrbXxkMr-N3MV?usp=sharing)

Higher resolution C3V scans (https://drive.google.com/drive/folders/1D2qi6Eit6bUy41gxEsryUqyzQDuZ9OCL?usp=sharing)

These files need cleanup before printing.
TREX


Haha, you missed this post!:)

Shiftrex
January 9th, 2021, 01:10 AM
aawwww yeah! Nice! Thanks for your work on C3V files

TREX
January 9th, 2021, 01:11 AM
Set of lower resolution C3V scans (mostly in Blender) (https://drive.google.com/drive/folders/1BHRgsDzjLqrHSOTEqqIlrbXxkMr-N3MV?usp=sharing)

Higher resolution C3V scans (https://drive.google.com/drive/folders/1D2qi6Eit6bUy41gxEsryUqyzQDuZ9OCL?usp=sharing)

These files need cleanup before printing.
TREX


Haha, you missed this post!:)

Arashara Goshiri is Done. Working on Bramcephis and Beorn Boltcutter Next.

TREX
January 9th, 2021, 01:13 AM
White Knight, what is the scale % needed to be at for the right scale?
Should we move this conversation over to the C3V 3d Proxies thread?
EDIT: I'm just finishing up Bramcephys

robbdaman
January 10th, 2021, 01:10 PM
Not sure if all the raw scans are the same typically but I've resized up 600% to get to where the ones I've done look proper sized. As far as the ones WK has completed they need to be enlarged 2540% I believe.

White Knight
January 10th, 2021, 01:24 PM
Not sure if all the raw scans are the same typically but I've resized up 600% to get to where the ones I've done look proper sized. As far as the ones WK has completed they need to be enlarged 2540% I believe.
I moved this discussion to the C3V thread, but in short: the RAW scans are NOT to scale. They need to be sized by the base or by the size of the actual figure.

During processing is when I correct the scale.

Lucace
January 12th, 2021, 05:11 PM
Printed on my photon and painted. The painting could use some work but Iím learning as I go. This is fun! https://i.postimg.cc/9FVyNtgF/BE5-A2-F54-C297-4-CB9-94-F7-928-B9-F0-FFDF7.jpg

Yodaking
January 12th, 2021, 06:18 PM
Those turned out great!

Tornado
January 12th, 2021, 07:05 PM
That Zelrig looks better than the official one.
Hydras looks sweet as well.

Myth26
January 22nd, 2021, 07:51 PM
White Knight What program do you use to make new 3D models?

White Knight
February 28th, 2021, 01:33 AM
@White Knight (https://www.heroscapers.com/community/member.php?u=9472) What program do you use to make new 3D models?
I use 3DF Zephyr free

bmarentx
March 12th, 2021, 09:29 AM
Hello,

I have made a few prints of Zelrig, zetacron and sujoah. I have cleaned up and repaired some of the fragments and junk from the original scan as well as separating the Zelrig figure into fragments for easier prints. Not sure how to upload the repair stl files. Please advise. Also I wanted to post some pis of my finished figures for a sample, but not sure how to sign into the gallery. Thanks

robbdaman
March 12th, 2021, 01:25 PM
Hello,

I have made a few prints of Zelrig, zetacron and sujoah. I have cleaned up and repaired some of the fragments and junk from the original scan as well as separating the Zelrig figure into fragments for easier prints. Not sure how to upload the repair stl files. Please advise. Also I wanted to post some pis of my finished figures for a sample, but not sure how to sign into the gallery. Thanks

Google drive is one option for file hosting that I know many of us use, you just have to get the settings right for others to access. You could also create a Thingiverse account but that may be more than necessary.

I believe you have to be a site supporter to have access to the Gallery but you can host pictures on anywhere that allows you to. Imgur is a popular, easy to use one.

bmarentx
March 12th, 2021, 03:42 PM
Got it!

Here is a Zelrig print that I did. Majestic Fire anyone!?
https://imgur.com/lg5GLCF.jpg
https://imgur.com/6VOH3Ce.jpg
https://imgur.com/6GBf9rB.jpg

robbdaman
March 12th, 2021, 04:34 PM
Got it!

Here is a Zelrig print that I did. Majestic Fire anyone!?
https://imgur.com/lg5GLCF.jpg
https://imgur.com/6VOH3Ce.jpg
https://imgur.com/6GBf9rB.jpg


That pretty sweet! Looks cool in clear red resin. :jawdrop:

bmarentx
March 12th, 2021, 04:37 PM
Thanks! It saves on paint and looks amazing once the semi gloss clear coat is applied. For clear resins you do need a semi of full gloss depending on the clearness you want to achieve. It will look a bit cloudy at first, but once clear coat is applied it really pops.

bmarentx
March 12th, 2021, 04:42 PM
Here are the links to the repaired stl files for Zelrig, sujoah and zetacron.

sujoah - cleaned up fragments and repaired wings. I left the wings attached and beefed up the wing base to give it more strength. When I printed the wings separate, they would always far off and break.
https://www.thingiverse.com/thing:4792162

Zetacron - cleaned up fragments
https://www.thingiverse.com/thing:4792132

Zelrig - I separated the wings from the body to print by themselves. They have pegs for alignment and show almost no seam when glued. Also had a bunch of failed resin prints with the head so I broke that away as well for ease of printing.
https://www.thingiverse.com/thing:4792143

No sense having everyone slice and dice in meshmixer when I have already done it. Meshmiixer can be tricky to use and edit with, so here they are.

Hope this helps.

Yodaking
March 12th, 2021, 05:05 PM
Yeah, that looks sweet. The clear resin will be really nice for the elementals.

Tornado
March 13th, 2021, 12:28 PM
Awesome Zelrig. Better than the original.

vegietarian18
June 7th, 2021, 12:23 PM
Thanks for all the great work scapedood for scanning all of these in. Amazing resource. Just got a 3D printer recently, have had some struggles but also some really good results. Maybe eventually will make a thread on 3D printing techniques specifically for Heroscapers looking to 3D print since there is a lot of knowledge for it.

FYI, on the Fyorlag Spider file, the third Spider seems to be a partial scan, missing the middle part of the bug. On a related note, anyone have any tips for how to print Spiders? We keep having supports intersecting the legs that then take the legs off with them, or legs missing supports that don't print well.

Muskie
June 7th, 2021, 02:30 PM
Thanks for all the great work scapedood for scanning all of these in. Amazing resource. Just got a 3D printer recently, have had some struggles but also some really good results. Maybe eventually will make a thread on 3D printing techniques specifically for Heroscapers looking to 3D print since there is a lot of knowledge for it.

FYI, on the Fyorlag Spider file, the third Spider seems to be a partial scan, missing the middle part of the bug. On a related note, anyone have any tips for how to print Spiders? We keep having supports intersecting the legs that then take the legs off with them, or legs missing supports that don't print well.

I print mine upside down. the extra bumps from the supports just adds to the texture of the spider and I do not loose legs when removing the supports. You also might want to thin the supports (There is a great video about settings that I would recommend if I could remember who did it).

White Knight
June 8th, 2021, 11:10 AM
FYI, on the Fyorlag Spider file, the third Spider seems to be a partial scan, missing the middle part of the bug.

Scapedood uploaded a fixed version of that spider, but you have to download the spiders one at a time. If you download them as a group, for some reason it uses the original damaged model.


On a related note, anyone have any tips for how to print Spiders? We keep having supports intersecting the legs that then take the legs off with them, or legs missing supports that don't print well.
I print them like this:

https://www.mediafire.com/view/z90a7rl80t0f198

(picture does not seem to be working)
www.mediafire.com/view/b5knhp9ege07kjn

And my presupported Fyorlag model is here (https://drive.google.com/file/d/1QdH8gZYbSE329iARmmsDssKTXnSZCX3-/view?usp=sharing).

White Knight
June 8th, 2021, 11:24 AM
Does anyone know why my mediafire link won't show up anymore? They seemed to have changed their "link" format.


Should be a picture here as well:
https://www.mediafire.com/convkey/1b9c/z90a7rl80t0f1985g.jpg https://www.mediafire.com/view/z90a7rl80t0f198


https://www.mediafire.com/view/z90a7rl80t0f198

DanieLoche
July 8th, 2021, 10:09 AM
https://www.mediafire.com/view/z90a7rl80t0f198

(picture does not seem to be working)
www.mediafire.com/view/b5knhp9ege07kjn (http://www.mediafire.com/view/b5knhp9ege07kjn)

And my presupported Fyorlag model is here (https://drive.google.com/file/d/1QdH8gZYbSE329iARmmsDssKTXnSZCX3-/view?usp=sharing).


Looks like thet disabled the right click menu for a custom one instead that prevent you from getting the actual image URL.


You can still find it with a little more efforts by going on the "Page Information" (Ctrl + I on firefox). Here you have the list of all the medias (icons, videos, images) on the webpage and their respective size/format/URLs. I don't know the equivalent on Chrome.

White Knight
July 8th, 2021, 03:25 PM
FYI, on the Fyorlag Spider file, the third Spider seems to be a partial scan, missing the middle part of the bug.

Scapedood uploaded a fixed version of that spider, but you have to download the spiders one at a time. If you download them as a group, for some reason it uses the original damaged model.


On a related note, anyone have any tips for how to print Spiders? We keep having supports intersecting the legs that then take the legs off with them, or legs missing supports that don't print well.I print them like this:

https://www.mediafire.com/view/z90a7rl80t0f198

(picture does not seem to be working)
www.mediafire.com/view/b5knhp9ege07kjn (http://www.mediafire.com/view/b5knhp9ege07kjn)

And my presupported Fyorlag model is here (https://drive.google.com/file/d/1QdH8gZYbSE329iARmmsDssKTXnSZCX3-/view?usp=sharing).


Looks like thet disabled the right click menu for a custom one instead that prevent you from getting the actual image URL.


You can still find it with a little more efforts by going on the "Page Information" (Ctrl + I on firefox). Here you have the list of all the medias (icons, videos, images) on the webpage and their respective size/format/URLs. I don't know the equivalent on Chrome.
Awesome! That worked!

Riku4470
July 30th, 2021, 10:54 PM
Hello everyone i was wondering if someone has the a folder of all the figures that have the supports in them already? I saw one guy had a file with the fryolorg spiders. Thank you!

TREX
July 30th, 2021, 11:33 PM
Hello everyone i was wondering if someone has the a folder of all the figures that have the supports in them already? I saw one guy had a file with the fryolorg spiders. Thank you!

Usually presupported files are associated with paid services. I donít generally see a bunch of free files like this. Sure there are some, but not generally.

Riku4470
July 31st, 2021, 01:36 AM
I see if this is the case i was wondering if us as a community could come together and get pre-supported files for everyone to use. and maybe upload them next to the original scan\ stl files.

I know i have a few pre-supported stl files i could contribute.(that dont fail)

White Knight
July 31st, 2021, 02:12 AM
I see if this is the case i was wondering if use as a community could come together and get pre-supported files for everyone to use. and maybe upload them next to the original scan\ stl files.

I know i have a few pre-supported stl files i could contribute.(that dont fail)
This is a good idea. I can take my chitubox files and export them as pre-supported as well--I just haven't done it yet.

We might need a new thread to make it easier to manage.

Riku4470
July 31st, 2021, 03:09 AM
awesome that made my day! Just let us know what you would plan to do!

Long live heroscape!!

p.s thank you to your dedication to heroscape!

White Knight
August 7th, 2021, 11:25 AM
These are the figures I have pre-supported:
WK's pre-supported resin files (https://drive.google.com/drive/folders/1sRDw61P8KSg-JKnMLq_xjE0R2BrXOFf6?usp=sharing)

I don't have a list, but the files names are clear.

gatormustang
August 8th, 2021, 11:30 AM
White Knight will you be creating Sujoah's Wings? I see the supported body, but do not see the wings located in your files.

White Knight
August 9th, 2021, 02:59 PM
@White Knight (https://www.heroscapers.com/community/member.php?u=9472) will you be creating Sujoah's Wings? I see the supported body, but do not see the wings located in your files.
I'll have to redo the supports. I have them as an output file for my Elegoo Mars (so I can print more), but I didn't save the chitubox file with the supports.

In the meantime, they are not hard to support. I print them vertical (posts near the build plate, tip of the wings straight up). So I only needed supports near the base of the wing.

Lucace
October 5th, 2021, 05:39 PM
Here is a link to my pre-supported figures:

Lucace's Pre-supported Figures (https://drive.google.com/drive/folders/1kPU42dIuyAdRhvu8_V4a6d_AwqkZdGAx?usp=sharing)

These have all been printed so there shouldn't be any print failures. I can't promise that the supports are perfect but I've been happy enough with the results!

White Knight
October 6th, 2021, 01:36 PM
Here is a link to my pre-supported figures:

Lucace's Pre-supported Figures (https://drive.google.com/drive/folders/1kPU42dIuyAdRhvu8_V4a6d_AwqkZdGAx?usp=sharing)

These have all been printed so there shouldn't be any print failures. I can't promise that the supports are perfect but I've been happy enough with the results!
Thank you! I'm sure these will be useful to many people.

the1whoknoxx
November 11th, 2021, 04:49 PM
First time seeing this thread. First of all, phenomenal work. I tried to get 3d scans using the same scanner you have and they didn't turn out anywhere near as good. I know how difficult this is to get right and you nailed it.
Second, there are only 7 army cards left. Any chance the last few will be done any time soon?

Knox
November 11th, 2021, 07:07 PM
Is your name also Knox?

First time seeing this thread. First of all, phenomenal work. I tried to get 3d scans using the same scanner you have and they didn't turn out anywhere near as good. I know how difficult this is to get right and you nailed it.
Second, there are only 7 army cards left. Any chance the last few will be done any time soon?

White Knight
November 12th, 2021, 12:51 AM
First time seeing this thread. First of all, phenomenal work. I tried to get 3d scans using the same scanner you have and they didn't turn out anywhere near as good. I know how difficult this is to get right and you nailed it.
Second, there are only 7 army cards left. Any chance the last few will be done any time soon?
You have an Einscan-se?


Also, I don't know Scapedood's plans for the figures from the final 7 cards, but I've improved my photogrammetry scans and they are looking a lot closer to Scapedood's scans.

I've already posted updated files on Thingiverse for:
Drow Chainfighter
Marrden Hounds
Parmenio

I still need to clean up and post:
Grok Riders
Microcorp Agents
Raelin the Kyrie Warrior (SotM)
Sacred Band

I'll try to finish them soon.